Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

They may be not working at this time on it and may later on. I'll re-confirm.
Thanks.

[FrankTheTank]

They may be not working at this time on it and may later on. I'll re-confirm.
Thanks.

No, I was told directly that they are not working on a fix.  They may work on one later, however, at this time they are not.

[FurryNutz]

No, it's under review with D-Link and one last FW update should be forth coming before EOL from what I'm told.
The problem is only seen with ISP speeds 100Mb ISP speeds. Users with 100Mb ISP speeds and above should disable QoS until further notice.

[FrankTheTank]

No, it's under review with D-Link and one last FW update should be forth coming before EOL from what I'm told.

Who told you this?  The customer support rep I spoke to said they were aware of the problem but that they were not working on a fix.  It sounds like you are speculating.

The problem is only seen with ISP speeds 100Mb ISP speeds. Users with 100Mb ISP speeds and above should disable QoS until further notice.

I'm not sure how you came to believe this, but my connection is only 55 Mb and I have the problem.

[FurryNutz]

I think the cut off problem is at 50. I have a friend w 40mb ISP and his works. I have contact w D-Link.

[FrankTheTank]

The router is now EOL and what a surprise...no fix.  Like I said, DLINK wasn't working on a fix for the QoS issue.  You where speculating that a fix was coming, and now we can be certain that one never will.

[FurryNutz]

Working on getting GPL code for rev As. Until then:
http://forums.dlink.com/index.php?topic=53989.msg270106#msg270106

The router is now EOL and what a surprise...no fix.  Like I said, DLINK wasn't working on a fix for the QoS issue.  You where speculating that a fix was coming, and now we can be certain that one never will.

[FurryNutz]

Can anyone with 100Mb or greater down ISP speeds test this?
http://forums.dlink.com/index.php?topic=65889.0

[FrankTheTank]

Update: Firmware 1.12 does not resolve problems with QoS functionality.

[FurryNutz]

This forum thread is now closed due to EoL for the DIR-868L. Been a good router.
Thanks for all the user input.

Users can load 3rd party FW if for continued use as a router:
http://forums.dlink.com/index.php?topic=53989.msg270106#msg270106

Other good uses for the 868L, Wireless Bridge mode or LAN to LAN AP mode.

Good Luck.

[FurryNutz]

v1.20x FW may have bad behaviors when using the 868L Rev A in wireless bridge mode:
http://forums.dlink.com/index.php?topic=74056.0