• December 07, 2019, 07:30:10 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2] 3

Author Topic: DIR 882 A1 New Firmware Released 1.20  (Read 5011 times)

me_iauras

  • Level 2 Member
  • **
  • Posts: 31
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #15 on: June 19, 2019, 06:24:30 AM »

No I didn't but that's not something that should be required and it shouldn't have such a profound effect if not carried out .
I'll do it later when I get back home but I'm not being very hopeful that it will fix anything .
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #16 on: June 19, 2019, 06:55:18 AM »

If the reset doesn't fix it, go back to prior version of FW and see if the speed comes back. Maybe something in newer version that could be effecting something with your wifi card as well. Ensure your wifi adapter card drivers are also up to date.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

me_iauras

  • Level 2 Member
  • **
  • Posts: 31
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #17 on: June 19, 2019, 08:36:12 AM »

Yea ; the weirdest thing . I came back home and now without any change form my part everything seems to be right back even though last night for about 1h I couldn't get more than 40-41 MB/s ( I read the news that the update was seeded not long before bedtime ).
Anyhoo all seems OK now .
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #18 on: June 19, 2019, 08:41:51 AM »

Ok. Possible a settling in between the router and your adapter was needed. One reason for a factory reset after updates is recommended.

Enjoy.  ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #19 on: June 20, 2019, 01:05:28 PM »

Ran into a problem. Sometime around 2AM this morning, the router stopped. Cameras were off line then and other half said they had not internet at all when getting online this morning for work. I took my iPhone and D-Link app and was able to connect to the router and reboot it. Internet was back online after it was back to ready. I updated FW and didn't reset this time so I'll do a reset and setup from scratch again and see if it happens again.  :-\
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Griiim

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #20 on: June 27, 2019, 08:37:26 AM »

After I've updated to FW 1.20 my two wireless USB adapters can't find 5GHz band.
Linksys Max-stream AC-1200
TP_Link Archer T9UH

If I down grade to 1.11 and use factory settings except for channel width which I set to 20/40/80 both devices work properly again. All other peripherals like my phones, chromecast, tv etc don't have a problem with FW 1.20, just the USB devices I mentioned above
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #21 on: June 27, 2019, 09:54:23 AM »

Was a factory reset performed after updating to v1.20?
Did you try disabling smart connect and see if the adapters saw the 5Ghz band?
Ensure your adapter drivers are up to date?

After I've updated to FW 1.20 my two wireless USB adapters can't find 5GHz band.
Linksys Max-stream AC-1200
TP_Link Archer T9UH

If I down grade to 1.11 and use factory settings except for channel width which I set to 20/40/80 both devices work properly again. All other peripherals like my phones, chromecast, tv etc don't have a problem with FW 1.20, just the USB devices I mentioned above
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Griiim

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #22 on: June 28, 2019, 01:40:20 AM »

Yes on both questions. I still haven't managed to get 5GHz band to work with the mentioned devices. FW 1.11 works for me so i'll stick with that for now
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #23 on: June 28, 2019, 07:17:02 AM »

I would contact D-Link about this and have them review this...
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #24 on: June 28, 2019, 09:01:17 AM »

Can you try the following if you get some time?
Load up v1.20 again, factory reset, setup from scratch and this time, disable Smart Connect. Set WPA to disable temporarily. Use default SSIDs for this.
Configure both adapters to forget an clear out any prior connected profiles on the PCs.
Then have the adapters scan and see if they see the SSID with out a PW.

Post your findings. If the adapters still fail, please revert back to v1.11.

Thank you.

Yes on both questions. I still haven't managed to get 5GHz band to work with the mentioned devices. FW 1.11 works for me so i'll stick with that for now
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Griiim

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #25 on: June 30, 2019, 01:41:23 AM »

I'll try and do it tomorrow (monday)

Can you try the following if you get some time?
Load up v1.20 again, factory reset, setup from scratch and this time, disable Smart Connect. Set WPA to disable temporarily. Use default SSIDs for this.
Configure both adapters to forget an clear out any prior connected profiles on the PCs.
Then have the adapters scan and see if they see the SSID with out a PW.

Post your findings. If the adapters still fail, please revert back to v1.11.

Thank you.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #26 on: July 02, 2019, 08:51:08 AM »

I'll post this here in hopes D-Link can look into this or pass this along to HQ.

Since the 882 was updated to v1.20, it now supports 160Mhz on 5Ghz. I have a NetGear R7800 that also supports 160Mhz. The R7800 is configured for wireless bridge mode so I can test out the 160Mhz on the 882. The R7800 reports it connect at 1733Mpbs and seems to work for the most part. General internet access and speedtest work and return correct results. However, I have found an odd issue with the R7800 wireless bridge connected to the 882 on 5Ghz.

If I have 1 xbox game console wire connected to the 882, and a 2nd xbox game console wired connected to the NetGear R7800, and both game consoles are online and if either gamer connects to voice chat on XBL, we noticed that the 2nd game console thats connected to the R7800 keeps getting voice chat disconnected then reconnected for few seconds then disconnected again. The xbox voice chat keeps trying to reconnect to the other gamer on the wired game console. I removed the 2nd xbox game console from the R7800 and directly connected it to the 882 and the problem was solved. I also tried having the 2nd game console that was connected to the R7800 be turned on first, then turning on wired xbox game console be turned on lastly. We noticed that it's voice chat kept doing the same thing, disconnecting and reconnecting for unknown reasons. I presumed something between the R7800, 882 and both game consoles were not working correctly with using in the R7800 in wireless bridge mode connected to the 882.

So yesterday I turned OFF the wifi radios on the 882 and wire connected a COVR2200 in AP mode to the 882. I then wirelessly connected the R7800 to the 2200 AP. 2nd xbox game console connected to the R7800. Both gamers has uninterrupted chat and we gamed for hours playing Division 2 yesterday.

I see the R7800 is Qualcomm Atheros QCA9984
The DIR-882 is MediaTek MT7615N
The COVR2200 is Qualcomm IPQ4019
I presume maybe some in-compatibility concerns here between QCA and MediaTek...Since the R7800 and COVR2200 seems to work well.  ::)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

GreenBay42

  • Administrator
  • Level 10 Member
  • *
  • Posts: 2249
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #27 on: July 02, 2019, 09:10:14 AM »

Call tech support :)
Logged

GreenBay42

  • Administrator
  • Level 10 Member
  • *
  • Posts: 2249
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #28 on: July 02, 2019, 09:16:04 AM »

Does this happen when:

1. Connect using 20/40/80
2. When both XBs are connected to 882 (wifi)
3. When both XBs are connected to R7800
4. When connected via Ethernet to 882
5. Older firmware on 882
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 A1 New Firmware Released 1.20
« Reply #29 on: July 02, 2019, 09:39:53 AM »

I thought this was tech support?  :P

Good info. Will give this a try and report back. I have nothing better to do since I have this week off.  ::)

1. Connect using 20/40/80 - Will try this today.
2. When both XBs are connected to 882 (wifi) - I can only do one console via wifi as the other is down in the basement. I will connect mine since mine the closest.
3. When both XBs are connected to R7800 - Same as #2.
4. When connected via Ethernet to 882 - This corrects the problem seen
5. Older firmware on 882 - I will downgrade and test after checking item #1.
« Last Edit: July 02, 2019, 09:43:09 AM by FurryNutz »
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: 1 [2] 3