• August 24, 2019, 05:57:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSL-2740M - wrong password on wifi connection - but is correct  (Read 475 times)

ljb2107

  • Guest

Hi

I have a DSL-2740M ADSL2+ that will not let me log into it via wifi from certain devices.

I am able to login via pc/tv etc but my iphones keep asking for the password. I enter it and it tells me its wrong (it is correct!) . It will then suddenly let me access the wifi and then drop out. This then repeats.

I have reset all network settings on the phone and the problem repeats. The router shows the devices as connected devices?

Does this router have a maximum number of devices that it can connect? I have around 10 wifi devices

any advice or suggestions would be welcome. Thank you
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47712
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSL-2740M - wrong password on wifi connection - but is correct
« Reply #1 on: April 15, 2019, 06:48:09 AM »

Link>Welcome!

  • What Hardware version is your modem? Look at the sticker under modem.
  • Link>What Firmware version is currently loaded? Found on the modems web page under status.
  • What region are you located?

What kind of SSID and PW do you have set on the modem? Complex or simplistic?
Try a simple SSID and PW on the modem then see if all devices can connect...

  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting