• February 19, 2020, 03:56:35 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSR 500 static DNS does not work from my machine  (Read 2481 times)


  • Level 1 Member
  • *
  • Posts: 1
DSR 500 static DNS does not work from my machine
« on: December 15, 2017, 02:24:11 AM »

 A DSR500 route, Setup Static DNS. Can access the static DNS network in route. But can not access from a machine which under the router.
DSR500 LAN:;, gateway: second router WAN2 use IP to connect to DSR500 lan Static DNS: dest:; mask; gateway:

in the DSR500 to ping is ok. my machine ip is which can not ping

Any other configurations need to setup? I used DSR250 for static DNS. it simple to setup and work fine.


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 48341
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR 500 static DNS does not work from my machine
« Reply #1 on: January 02, 2018, 01:14:22 PM »


  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

Usually you can't access resources across different sub nets or networks. Might check the user manual for some Route configuration information that could be used.
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!