• May 22, 2018, 10:14:39 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: web url  (Read 2713 times)

aspar74

  • Level 1 Member
  • *
  • Posts: 1
web url
« on: November 17, 2017, 02:59:10 AM »

Hello, could you give us all the url enabled on this webcam?
I've found this:
http://[username]:[password]@XXX.XXX.XXX.XXX/image/jpeg.cgi

Thank you
Alfonso
Logged

kamsvag

  • Level 1 Member
  • *
  • Posts: 5
Re: web url
« Reply #1 on: December 28, 2017, 12:23:42 PM »

Any news on this yet?
I know you like your cloud but for those of us who prefer local control it would be nice to have those URLs that you so obviously have but fail to share.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 44997
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: web url
« Reply #2 on: December 28, 2017, 01:34:05 PM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email. USA support and chat 24/7 as well.
Let us know how it goes please.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

kamsvag

  • Level 1 Member
  • *
  • Posts: 5
Re: web url
« Reply #3 on: December 29, 2017, 12:16:08 AM »

I just spoke to support in Sweden. According to them there is no .cgi-links ..

Apparently they are wrong.
Logged

kamsvag

  • Level 1 Member
  • *
  • Posts: 5
Re: web url
« Reply #4 on: December 29, 2017, 02:35:00 AM »

Here's the URLs that I've found.

Video Only:
http://admin:<password>@<ip address>/video/ACVS-H264.cgi?profileid=1

Audio Only:
http://admin:<password>@<ip address>/av2/ACAS-ULAW.cgi

Theese seem to work as the browser start downloading the .cgi-files, how ever I can't get the streams to show in VLC or iSpy.  :-\
Logged

hcgonzalezpr

  • Level 1 Member
  • *
  • Posts: 2
Re: web url
« Reply #5 on: January 03, 2018, 04:06:48 PM »

Here's the url for VLC/iSPY with Video+Audio:
http://[username]:[password]@XXX.XXX.XXX.XXX/video/flv.cgi
http://[username]:[password]@XXX.XXX.XXX.XXX/av2/flv.cgi

There's also this other url, but requires Digest Auth:
http://XXX.XXX.XXX.XXX/video/mpegts.cgi
http://XXX.XXX.XXX.XXX/av2/mpegts.cgi

This cam advertise itself as RTSP capable, but I have yet to find a working url for RTSP.
Logged

kamsvag

  • Level 1 Member
  • *
  • Posts: 5
Re: web url
« Reply #6 on: January 07, 2018, 10:32:30 PM »

Excellent!
Logged

kamsvag

  • Level 1 Member
  • *
  • Posts: 5
Re: web url
« Reply #7 on: January 08, 2018, 12:58:00 AM »

Is it possible to get higher resolution than what is provided in this URL?

Hello, could you give us all the url enabled on this webcam?
I've found this:
http://[username]:[password]@XXX.XXX.XXX.XXX/image/jpeg.cgi

Thank you
Alfonso
Logged

tra2Huju

  • Level 1 Member
  • *
  • Posts: 4
Re: web url
« Reply #8 on: March 23, 2018, 03:28:48 AM »

H264 streams:

model=DCS-8000LH
brand=D-Link
version=1.01
build=01
hw_version=A
nipca=1.9.7

"C:\Program Files\VideoLAN\VLC\vlc.exe" http://UserName:Password@CameraIP:Port/video/flv.cgi

Stream 1 - Audio
Codec: MPEG AAC Audio (mp4a)
Stream 0 - Video
Codec: H264 - MPEG-4 AVC (part 10) (avc1)
Resolution: 1280 x 738
Frame rate: 30
Decoded format: Planar 4:2:0 YUV


"C:\Program Files\VideoLAN\VLC\vlc.exe" http://UserName:Password@CameraIP:Port/video/mpegts.cgi
Stream 0 - Audio
Codec: MPEG AAC Audio (mp4a)
Stream 1 - Video
Codec: H264 - MPEG-4 AVC (part 10) (h264)
Resolution: 1280 x 738
Frame rate: 30
Decoded format: Planar 4:2:0 YUV
Logged

tra2Huju

  • Level 1 Member
  • *
  • Posts: 4
Re: web url
« Reply #9 on: March 31, 2018, 05:51:20 AM »

Some CGI-URL for DCS-8000LH

NIPCA-API (Network IP Camera Application Programming Interface)

model=DCS-8000LH
brand=D-Link
version=1.01
build=01
hw_version=A
NIPCA-API = ver. 1.9.7

Syntax:
http://UserName:Password@CameraIP:Port/<CGI-URL>?<parameter>=<value>[&<parameter>=<value>...]

Where:
<CGI-URL> is a URL of a CGI, e.g. "/common/info.cgi"

NIPCA-API details and more CGI-URL possibly compatible with DCS-8000LH are e.g. here:
http://www.trendnet.com/_uploads/helpdesk/tv-ip612xx_cgi-10.pdf
http://gurau-audibert.hd.free.fr/josdblog/wp-content/uploads/2013/09/CGI_2121.pdf


Camera configuration:
Run CGI-URL without parameters to obtain a list of available parameters and their values.

Camera info
/common/info.cgi

Check wifi networks and signal strength
/config/wlansurvey.cgi
/config/wireless.cgi

Get stream informations
/config/stream_info.cgi
vprofile1=H264
vprofileurl1=/video/ACVS-H264.cgi?profileid=1

Network config, e.g. change port
/config/network.cgi?httpport=XXXX&httpexternalport=YYYY

Camera name, location
/config/camera_info.cgi

Change wifi
/config/wireless.cgi?essid=Name&passphrase=Password

Microphone, its gain
/config/mic.cgi?enable=no&volume=0

Add/delete user or group, change password
The command changes the admin’s password successfully. However, it is not possible then to use that password to log in. I could create a new user in the group Users but only with a blank password.
/config/user_mod.cgi?name=UserName&password=XXXX&group=Users
/config/user_del.cgi?name=UserName

/config/user_list.cgi
/config/user_list.cgi?name=admin
/config/user_list.cgi?name=UserName
/config/group_list.cgi

UPNP disable
/config/upnp.cgi?upnpav=off&upnpcp=off

Contrast, brightness, saturation, flip, mirror, etc.
/config/sensor_info.cgi
/config/sensor.cgi?flicker=50&sharpness=40

Disable motion detection
/config/motion.cgi?enable=no

Disable audio detection
/config/audio_detection.cgi?enable=no

LED on/off
/config/led.cgi?led=off

Infra off, day mode
/config/icr.cgi?mode=day&night_irled=off

Reboot, reset
/config/system_reboot.cgi?reboot=go
/config/system_reset.cgi?reset=go

Get a JPEG image
/image/jpeg.cgi

Date, time
/config/datetime.cgi

Get URL entry of specified profile
/config/rtspurl.cgi?profileid=1

Check video profile
/config/video.cgi?profileid=1

Change codec of profile 1 to MJPEG stream and back to H264
/config/video.cgi?profileid=1&codec=MJPEG
/config/video.cgi?profileid=1&codec=H264

Watch MJPEG stream, after the codec change, in web browser
http://UserName:Password@CameraIP:Port/video/mjpg.cgi
« Last Edit: March 31, 2018, 05:59:37 AM by tra2Huju »
Logged

GreenBay42

  • Administrator
  • Level 6 Member
  • *
  • Posts: 918
Re: web url
« Reply #10 on: April 02, 2018, 07:12:19 AM »

Thank you tra2Huju for the info.
Logged