D-Link Forums

D-Link IP Cameras for Home => DCS-8000LH => Topic started by: aspar74 on November 17, 2017, 02:59:10 AM

Title: web url
Post by: aspar74 on November 17, 2017, 02:59:10 AM
Hello, could you give us all the url enabled on this webcam?
I've found this:
http://[username]:[password]@XXX.XXX.XXX.XXX/image/jpeg.cgi

Thank you
Alfonso
Title: Re: web url
Post by: kamsvag on December 28, 2017, 12:23:42 PM
Any news on this yet?
I know you like your cloud but for those of us who prefer local control it would be nice to have those URLs that you so obviously have but fail to share.
Title: Re: web url
Post by: FurryNutz on December 28, 2017, 01:34:05 PM
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email. USA support and chat 24/7 as well.
Let us know how it goes please.
Title: Re: web url
Post by: kamsvag on December 29, 2017, 12:16:08 AM
I just spoke to support in Sweden. According to them there is no .cgi-links ..

Apparently they are wrong.
Title: Re: web url
Post by: kamsvag on December 29, 2017, 02:35:00 AM
Here's the URLs that I've found.

Video Only:
http://admin:<password>@<ip address>/video/ACVS-H264.cgi?profileid=1

Audio Only:
http://admin:<password>@<ip address>/av2/ACAS-ULAW.cgi

Theese seem to work as the browser start downloading the .cgi-files, how ever I can't get the streams to show in VLC or iSpy.  :-\
Title: Re: web url
Post by: hcgonzalezpr on January 03, 2018, 04:06:48 PM
Here's the url for VLC/iSPY with Video+Audio:
http://[username]:[password]@XXX.XXX.XXX.XXX/video/flv.cgi
http://[username]:[password]@XXX.XXX.XXX.XXX/av2/flv.cgi

There's also this other url, but requires Digest Auth:
http://XXX.XXX.XXX.XXX/video/mpegts.cgi
http://XXX.XXX.XXX.XXX/av2/mpegts.cgi

This cam advertise itself as RTSP capable, but I have yet to find a working url for RTSP.
Title: Re: web url
Post by: kamsvag on January 07, 2018, 10:32:30 PM
Excellent!
Title: Re: web url
Post by: kamsvag on January 08, 2018, 12:58:00 AM
Is it possible to get higher resolution than what is provided in this URL?

Hello, could you give us all the url enabled on this webcam?
I've found this:
http://[username]:[password]@XXX.XXX.XXX.XXX/image/jpeg.cgi

Thank you
Alfonso
Title: Re: web url
Post by: tra2Huju on March 23, 2018, 03:28:48 AM
H264 streams:

model=DCS-8000LH
brand=D-Link
version=1.01
build=01
hw_version=A
nipca=1.9.7

"C:\Program Files\VideoLAN\VLC\vlc.exe" http://UserName:Password@CameraIP:Port/video/flv.cgi

Stream 1 - Audio
Codec: MPEG AAC Audio (mp4a)
Stream 0 - Video
Codec: H264 - MPEG-4 AVC (part 10) (avc1)
Resolution: 1280 x 738
Frame rate: 30
Decoded format: Planar 4:2:0 YUV


"C:\Program Files\VideoLAN\VLC\vlc.exe" http://UserName:Password@CameraIP:Port/video/mpegts.cgi
Stream 0 - Audio
Codec: MPEG AAC Audio (mp4a)
Stream 1 - Video
Codec: H264 - MPEG-4 AVC (part 10) (h264)
Resolution: 1280 x 738
Frame rate: 30
Decoded format: Planar 4:2:0 YUV
Title: Re: web url
Post by: tra2Huju on March 31, 2018, 05:51:20 AM
Some CGI-URL for DCS-8000LH

NIPCA-API (Network IP Camera Application Programming Interface)

model=DCS-8000LH
brand=D-Link
version=1.01
build=01
hw_version=A
NIPCA-API = ver. 1.9.7

Syntax:
http://UserName:Password@CameraIP:Port/<CGI-URL>?<parameter>=<value>[&<parameter>=<value>...]

Where:
<CGI-URL> is a URL of a CGI, e.g. "/common/info.cgi"

NIPCA-API details and more CGI-URL possibly compatible with DCS-8000LH are e.g. here:
http://www.trendnet.com/_uploads/helpdesk/tv-ip612xx_cgi-10.pdf (http://www.trendnet.com/_uploads/helpdesk/tv-ip612xx_cgi-10.pdf)
http://gurau-audibert.hd.free.fr/josdblog/wp-content/uploads/2013/09/CGI_2121.pdf (http://gurau-audibert.hd.free.fr/josdblog/wp-content/uploads/2013/09/CGI_2121.pdf)


Camera configuration:
Run CGI-URL without parameters to obtain a list of available parameters and their values.

Camera info
/common/info.cgi

Check wifi networks and signal strength
/config/wlansurvey.cgi
/config/wireless.cgi

Get stream informations
/config/stream_info.cgi
vprofile1=H264
vprofileurl1=/video/ACVS-H264.cgi?profileid=1

Network config, e.g. change port
/config/network.cgi?httpport=XXXX&httpexternalport=YYYY

Camera name, location
/config/camera_info.cgi

Change wifi
/config/wireless.cgi?essid=Name&passphrase=Password

Microphone, its gain
/config/mic.cgi?enable=no&volume=0

Add/delete user or group, change password
The command changes the adminís password successfully. However, it is not possible then to use that password to log in. I could create a new user in the group Users but only with a blank password.
/config/user_mod.cgi?name=UserName&password=XXXX&group=Users
/config/user_del.cgi?name=UserName

/config/user_list.cgi
/config/user_list.cgi?name=admin
/config/user_list.cgi?name=UserName
/config/group_list.cgi

UPNP disable
/config/upnp.cgi?upnpav=off&upnpcp=off

Contrast, brightness, saturation, flip, mirror, etc.
/config/sensor_info.cgi
/config/sensor.cgi?flicker=50&sharpness=40

Disable motion detection
/config/motion.cgi?enable=no

Disable audio detection
/config/audio_detection.cgi?enable=no

LED on/off
/config/led.cgi?led=off

Infra off, day mode
/config/icr.cgi?mode=day&night_irled=off

Reboot, reset
/config/system_reboot.cgi?reboot=go
/config/system_reset.cgi?reset=go

Get a JPEG image
/image/jpeg.cgi

Date, time
/config/datetime.cgi

Get URL entry of specified profile
/config/rtspurl.cgi?profileid=1

Check video profile
/config/video.cgi?profileid=1

Change codec of profile 1 to MJPEG stream and back to H264
/config/video.cgi?profileid=1&codec=MJPEG
/config/video.cgi?profileid=1&codec=H264

Watch MJPEG stream, after the codec change, in web browser
http://UserName:Password@CameraIP:Port/video/mjpg.cgi
Title: Re: web url
Post by: GreenBay42 on April 02, 2018, 07:12:19 AM
Thank you tra2Huju for the info.
Title: Re: web url
Post by: nullit on June 27, 2018, 07:30:16 AM
In browser (FF 52.8.1esr) LAN address http://192.168.0.xxx/image/jpeg.cgi works (requests Username and Password) and, after changing codec to MJPEG, http://192.168.0.115/video/mjpg.cgi also works.
But why would DynDNS web addresses like http://xxxxx.dlinkddns.com:xxx/image/jpeg.cgi and http://xxxxx.dlinkddns.com:xxx/video/mjpg.cgi not work, even if including Username and Password in the links ?

Cam firmware NOT updated (is 1.01.01), - and one apparently needs to stay away from updates for the time being !

Any feedback certainly appreciated before cams go back to shop (absence of browser setup is a royal pain).

.....
Title: Re: web url
Post by: nullit on June 29, 2018, 07:38:05 AM
Newsflash : Live video stopped working, no MJPEG, no H264, no mydlink.com video nor sound. Cams go back to shop for refund !!
Title: Re: web url
Post by: Bobone on August 30, 2018, 08:33:38 AM
DON'T UPDATE FW to 2.0

and you can continue w/o problems.

(I bought the cams to access them directly!)
Title: Re: web url
Post by: FurryNutz on August 30, 2018, 09:56:57 AM
I presume the direct connection was a security concern thus D-Link may have removed that method of connection in v2.xx FW. Up to users if they want to take that into consideration or not with this model camera.  ???
Title: Re: web url
Post by: thomasx on October 13, 2018, 03:00:34 PM
So, there is no way to access these cameras directly?
Or even incorporating them in a Vera home automation system.
Junk.
Got them today, returning them tomorrow.
That was definitely the last time I bought Dlink stuff.
Title: Re: web url
Post by: GreenBay42 on October 15, 2018, 09:00:30 AM
The 8xxxLH series is app only. Only 4 out of 30+ d-link camera skus do not have a web UI. Also do not assume ALL cameras work with Vera and other 3rd party systems. It is best to do a little research before purchasing. Sorry the 8000s did not work for you.