• November 22, 2019, 01:22:43 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 [3]

Author Topic: Issue with AirPlay - Proper PortForwarding is Setup  (Read 19909 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47921
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Issue with AirPlay - Proper PortForwarding is Setup
« Reply #30 on: December 12, 2014, 12:24:02 PM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
  • Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
  • Ensure devices are set to auto obtain an IP address.
  • If IPv6 is an option on the router, select Local Connection Only under Setup/IPv6.
  • Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.
  • Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.
  • Turn off WISH, and WPS under Advanced.
  • WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
  • Set current Time Zone, Date and Time. Use an NTP Server feature. The DST setting is only needed in the NA region. Tools/Time.

Disable WLAN partiton if it's enabled under Advanced/Adv Wireless...

Your linked solution only works with wireless clients on the same band. I have issues with an iPhone on the 5GHz band and an AirPlay playback unit on wired ethernet.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

jcberg

  • Level 1 Member
  • *
  • Posts: 4
Re: Issue with AirPlay - Proper PortForwarding is Setup
« Reply #31 on: December 15, 2014, 04:45:08 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case. DIR-860L Rev. A1
  • Link>What Firmware version is currently loaded? Found on the routers web page under status. 1.02.
  • What region are you located? EU

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?Fibre
  • What ISP Modem Mfr. and model # do you have?Zyxel p2812 plugged into a fibre<->ethernet converter box. The P2812 is configured purely as a modem, the router receives a true ip address and not a local one (i.e. 192.xx or 10.xx)

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
  • Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.Done
  • Ensure devices are set to auto obtain an IP address.Done
  • If IPv6 is an option on the router, select Local Connection Only under Setup/IPv6.Done, but why break IPV6?
  • Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.Done. Any other setting breaks datagram broadcasting, regardless of whether SPI is enabled or not. Which is very weird.
  • Enable uPnP and Multi-cast Streaming under Advanced/Networking. Done Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.I've enabled multicast streams for both IPv4 and IPv6, however the required IPv4 addresses 224.0.0.251 and 239.255.255.250 never show up under "Status -> IPv4 Multicast addresses"

  • Turn off WISH, and WPS under Advanced.No such options
  • WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port SpeedAuto-negotiaton is enabled
  • Set current Time Zone, Date and Time. Use an NTP Server feature. The DST setting is only needed in the NA region. Tools/Time.Done

Disable WLAN partiton if it's enabled under Advanced/Adv Wireless... Disabled by default

Your linked solution only works with wireless clients on the same band. I have issues with an iPhone on the 5GHz band and an AirPlay playback unit on wired ethernet.

My answers in white. Once when i rebooted the router it actually showed a 224.x.x.x address under "Status->IPv4 Multicast group addresses", but i have not been able to get this up again.

BTW, the datagram broadcasting bug i mentioned under firewall settings were there on my old DIR-655 as well. This breaks autodiscovery of players and hosted games in older LAN games. In FW versions later than 1.02 the filtering option has been removed, which also completely breaks these older games which rely on datagram broadcasting
« Last Edit: December 15, 2014, 04:56:47 AM by jcberg »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47921
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Issue with AirPlay - Proper PortForwarding is Setup
« Reply #32 on: December 15, 2014, 07:46:06 AM »

So you have a DIR-860L and not a DIR-868L?  ??? If so then you should update the 860s FW from here:
http://forums.dlink.com/index.php?topic=61309.0
« Last Edit: December 15, 2014, 08:04:36 AM by FurryNutz »
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: 1 2 [3]