• October 31, 2020, 04:06:45 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS2121 firmware 1.05 update fail  (Read 5751 times)

keenwah

  • Level 1 Member
  • *
  • Posts: 3
DCS2121 firmware 1.05 update fail
« on: May 21, 2011, 09:30:13 AM »

My dcs 2121 ip camera was working fine till I tried  to update firmware 1.05(update_DCS-2102_DCS-2121_1.05_patch01_4927.bin). The IE screen mentioned update was ok(Firmware update successful:
The camera will now reboot, please wait for 0 seconds) but my IP camera never come back after reboot! the red light in front never goes off. The camera is connected to my Windows 7 PC directly through a a network cable. no able to rest the camera as well 

anyone can help ?   :'(
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS2121 firmware 1.05 update fail
« Reply #1 on: May 21, 2011, 03:58:16 PM »

The rear of the DCS-2121 contains a "Reset" button. If you hold this button for > 30 seconds, the camera will revert to the factory default settings. This procedure will reset the factory default firmware and erase all your settings.  So, if you can access the camera, you should save all your settings before proceeding.

Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

keenwah

  • Level 1 Member
  • *
  • Posts: 3
Re: DCS2121 firmware 1.05 update fail
« Reply #2 on: May 21, 2011, 05:01:48 PM »

I tried a few times using a paperclip to RESET(at the side) for >1min but the red red light refused to go off.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS2121 firmware 1.05 update fail
« Reply #3 on: May 21, 2011, 05:06:54 PM »

Are you able to login to the camera web interface? If so, can you upload an older version of the firmware?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

keenwah

  • Level 1 Member
  • *
  • Posts: 3
Re: DCS2121 firmware 1.05 update fail
« Reply #4 on: May 21, 2011, 05:49:04 PM »

I can't detect the camera at both the setup wizard or web interface
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS2121 firmware 1.05 update fail
« Reply #5 on: May 22, 2011, 06:32:07 AM »

The camera is connected to my Windows 7 PC directly through a a network cable...

Connect the camera to a port on your router, not directly to your PC.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC