+  D-Link Forums
|-+  D-Link Enterprise Firewall» D-Link NetDefend Firewalls» DFL 210: On/Off Switch?!
Username:
Password:
Pages: [1]
  Print  
Author Topic: DFL 210: On/Off Switch?!  (Read 1378 times)
tzeller
Level 1 Member
*
Posts: 1


« on: October 09, 2009, 01:38:21 PM »

Hello everybody,

I just bought a DFL 210 and wanted to install it.
However, the Quick Installation Guide tells me:

Quote
First, connect the power cord to the receptor at the back panel of
the DFL-210 and then plug the other end of the power cord to a
wall outlet or power strip.
Well, no problem.

Quote
Then powered on the DFL-210 using the on/off switch. Now the Power LED will turn ON to indicate
proper operation.
Which on/off switch do they mean? This might sound very stupid, but I really can't find any on/off switch.
When I simply connect it to the power supply the way it is now, the Power LED does not turn on, and the device stays dead.

Thank you for your help.
Logged
Fatman
Poweruser
Level 9 Member
****
Posts: 1697



« Reply #1 on: October 09, 2009, 04:13:53 PM »

There isn't an on and off switch, it sounds like this is a defective switch.
Logged

non progredi est regredi
Pages: [1]
  Print  
 
Jump to:  

Theme by webtechnica.com.