• June 15, 2024, 08:48:36 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: Cannot Detect wireless  (Read 17447 times)

kwang411

  • Level 1 Member
  • *
  • Posts: 2
Cannot Detect wireless
« on: September 15, 2009, 05:09:32 PM »
I just bought this adapter today, and unfortunately it's not working properly.
It can detect my wireless after I reboot my computer and connect to it, but after a few minutes it drops the connection and cannot detect my wireless at all.

I'm running Vista, can anybody please help me? Thanks!
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: Cannot Detect wireless
« Reply #1 on: September 15, 2009, 05:53:39 PM »
Quote from: kwang411 on September 15, 2009, 05:09:32 PM
I just bought this adapter today, and unfortunately it's not working properly.
It can detect my wireless after I reboot my computer and connect to it, but after a few minutes it drops the connection and cannot detect my wireless at all.

I'm running Vista, can anybody please help me? Thanks!

Hi kwang411,

Have you downloaded the latest drivers for Vista? Vista 32-bit or Vista 64-bit version?

Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

kwang411

  • Level 1 Member
  • *
  • Posts: 2
Re: Cannot Detect wireless
« Reply #2 on: September 15, 2009, 09:05:58 PM »
Yes, i updated the drivers through Device manager.
It shows the driver version is 7.6.1.204
Logged

tgillis

  • Level 1 Member
  • *
  • Posts: 17
Re: Cannot Detect wireless
« Reply #3 on: October 31, 2009, 07:41:17 PM »
I have the exact same issue.. works for a bit, then cuts out and doesn't see ANY network.. any help?
Logged

tgillis

  • Level 1 Member
  • *
  • Posts: 17
Re: Cannot Detect wireless
« Reply #4 on: November 01, 2009, 04:25:24 PM »
I'm running windows 7, I have a icore 7 2.8 (newer version), on a p7p55d mobo with 8gb of ddr 3 ram. ATI 5800 series vid card, 750watt power supply.

Same issue, I'm going to have to return the card if it keeps this up.
Logged

tgillis

  • Level 1 Member
  • *
  • Posts: 17
Re: Cannot Detect wireless
« Reply #5 on: November 08, 2009, 06:46:51 AM »
I just tried again with the new supposedly windows 7 drivers.  At least for these wireless connection manager sees that I have the hardware, but still, after a short period of time it looses all networks and does not get them back.
Logged

clift

  • Level 1 Member
  • *
  • Posts: 2
Re: Cannot Detect wireless
« Reply #6 on: November 24, 2009, 11:55:53 AM »
Guys, having the same problem. Except that the card doesn't detect any networks period. Never has. Even bought the damn thing twice from two different retailers.
Downloaded the latest drivers (1.60), and nothing. did everything under the sun including switch PCI slots and flash my bios on the motherboard. Zilch.
Motherboard is EVGA 780i Sli
CPU - E8400
Ram - 4gigs
Video card - EVGA 9800 GTX

Anybody find a solution?

P.S. the restarting of WLAN AUTOCONFIG service did nothing for me.
Thanks.
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: Cannot Detect wireless
« Reply #7 on: December 14, 2009, 07:04:33 AM »
Hi All,

I only have the Drivers of the DWA-552 Card installed, without the D-Link Wireless Network Manager Utility, since the D-Link Wireless Network Manager Utility was causing a Blue Screen of death for my previous DWL-G520 Adapter running in Windows XP Home Edition Service Pack 2.

Now currently have the DWA-552 Card installed in the computer, without the D-Link Wireless Network Manager, in Windows XP Home Edition Service Pack 3 and Windows 7 Ultimate 32-bit Release Candidate Version, in a Dual-boot configuration.

In XP, I am using the D-Link Drivers Version 1.50 and in Windows 7, the Vista Drivers Version 1.50 for Windows 7.

Note: D-Link has released 1.60 Drivers for the DWA-552 on November 5, 2009.
Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

mmontpetit

  • Level 1 Member
  • *
  • Posts: 2
Re: Cannot Detect wireless
« Reply #8 on: December 24, 2009, 04:21:50 AM »
I called the support center with the same issue they suggested I return the card and buy something that is supported by windows 7, they don't know if its the card or the driver..

So that is what I will do.. go with another card...

Logged

kerrmatt

  • Level 1 Member
  • *
  • Posts: 7
Re: Cannot Detect wireless
« Reply #9 on: December 29, 2009, 03:23:12 PM »
I'm getting the same issue with Windows 7 x64 Ultimate.

The first tech person I spoke to at D-LINK didn't even know about 1.60 version of the drivers.  I have it connecting every 45 sec or so, then loses connection for about 30 sec, then it reconnects.  That's because I have the D-LINK software running in Vista Compatibility.  Really getting annoying.
Logged

perek

  • Level 1 Member
  • *
  • Posts: 6
Re: Cannot Detect wireless
« Reply #10 on: January 01, 2010, 11:18:13 AM »
Haha, I have the same problem using Win 7 Home Premium and P7P55D mobo.  I lose the connection a couple minutes after booting into windows and then all the other available networks dissappear...  Tried various ways of installing the drivers (v.1.60), the DLINK utility and different PCI slot with no luck...the green light on the card keeps blinking about once a second...frustrating :-\  I'm about to jettison this card so please help!
« Last Edit: January 01, 2010, 11:22:32 AM by perek »
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: Cannot Detect wireless
« Reply #11 on: January 05, 2010, 09:50:30 AM »
Quote from: perek on January 01, 2010, 11:18:13 AM
Haha, I have the same problem using Win 7 Home Premium and P7P55D mobo.  I lose the connection a couple minutes after booting into windows and then all the other available networks dissappear...  Tried various ways of installing the drivers (v.1.60), the DLINK utility and different PCI slot with no luck...the green light on the card keeps blinking about once a second...frustrating :-\  I'm about to jettison this card so please help!

Hi perek,

The green light is suppose to blink.
Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

perek

  • Level 1 Member
  • *
  • Posts: 6
Re: Cannot Detect wireless
« Reply #12 on: January 11, 2010, 09:10:03 AM »
Thanks a lot!
Logged

perek

  • Level 1 Member
  • *
  • Posts: 6
Re: Cannot Detect wireless
« Reply #13 on: January 14, 2010, 03:16:35 AM »
I bought a different adapter and it works great.
Logged

retread

  • Level 2 Member
  • **
  • Posts: 25
Re: Cannot Detect wireless
« Reply #14 on: January 25, 2010, 07:22:08 PM »
Quote from: perek on January 14, 2010, 03:16:35 AM
I bought a different adapter and it works great.

Define "different" please.
Logged
Pages: [1] 2
« previous next »