• October 23, 2020, 03:13:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DGS-1100-08 & 08P VLAN setup  (Read 418 times)

Richpat

  • Level 2 Member
  • **
  • Posts: 34
DGS-1100-08 & 08P VLAN setup
« on: September 21, 2020, 07:01:53 AM »

Hi

I got these managed switches mostly for it POE features. As i got more cameras on the network, I would like to separate the camera network from the main network (web, chat, email), hoping to have better network performance.

I am new on this VLAN, hoping someone would be able to help on the setup.

The main switch is 1100-08, the second one is 1100-08P

1100-08
Boot 1.0.13
FW1.10.039
Protool 20.001.004
Hardware A2

1100-08P
Boot 1.0.2
FW 1.10.027
Protool 2.001.004
Hardware A1

VLAN 1 Main
VLAN 2 Camera

Switch 1 1100-08 (T-Tagged, U-Untagged, N-non member)
VLAN 1 Port 1T 2U 3U 4N 5U 6U 7U 8U
VLAN 2  Port 1T 2N 3N 4U 5N 6T 7T 8N

Port 1 Dlink DIR890L router
Port 2 VLAN 1 Management PC
Port 4 VLAN 2 Management PC
Port 6 VLAN 2 Dlink Camera A
Port 7 VLAN 2 Dlink Camera B
Port 8 Connect to Port 1 of 1100-08P


Switch 2 1100-08P
VLAN 1 Port 1T 2U 3U 4N 5U 6U 7U 8U
VLAN 2 Port 1T 2N 3N 4U 5N 6N 7N 8N

Port 1 connected to Port 8 of 1100-08
Port 4 Dlink camera C

VLAN 1 Mangement PC, I can see both switches, access to internet
VLAN 2 management PC, I can see streaming from Dlink Camera A and B , but Not C, cannot access to internet

The 3 testing  Dlink cameras, I have
CoS enable, VLAN =2 , all other parameter set at 4

I am seeking assistance on the following:

1) How to set up the the VLAN trunk between 2 switches, I think this is the reason why VLAN 2 PC cannot see Dlink Camera C
2) How is it possible to get VLAN 2 PC connect to the internet
3) Dlink camera A, B and C are no longer accessible from mydlink Apps,  how to fix it?

4) I noticed on the switch configuration page, there is a surveillance VLAN setting  solely for Dlink camera. I activated it and saw 3 MAC addresses. But only 2 MAC addresses are my cameras on the network. The 3rd MAC is unknown. I tried the "dynamic forwarding table" and was able to see the 8 dlink cameras identified as "surveillance VLAN" in the table. What is the reason only 2 of the 8 is shown in the surveillance VLAN?

5) With the "dynamic forwarding table", I am not seeing all the smart home devices in it. What could be the reason?


Best Regards

Pat


Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49276
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DGS-1100-08 & 08P VLAN setup
« Reply #1 on: September 21, 2020, 10:42:13 AM »

Does the user manual have any configuration information regarding this?
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Richpat

  • Level 2 Member
  • **
  • Posts: 34
Re: DGS-1100-08 & 08P VLAN setup
« Reply #2 on: September 21, 2020, 01:06:49 PM »

hi,
The user manual does not have much detail on the application.

The manual only said you can set as T, U or N, no mention on setting trunk VLAN between 2 managed switch.

I used this page from Dlink as reference.

http://businessblog.us.dlink.com/set-up-vlan-web-smart-switch/

I was able to setup the VLAN. I simply wanted to know if it can go beyond as a CLOSED private network.

Best Regards

Pat

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49276
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DGS-1100-08 & 08P VLAN setup
« Reply #3 on: September 21, 2020, 01:33:06 PM »

Something to ask D-Link support about and see. I don't have any experience beyond basic setup.  ;)
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!