• July 14, 2020, 01:09:08 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR 882 issues with Google Nest Minis  (Read 179 times)

bkmps3

  • Level 1 Member
  • *
  • Posts: 1
DIR 882 issues with Google Nest Minis
« on: March 29, 2020, 07:19:29 PM »

G'day everyone.

I have an 882 running FW 1.20.

I have a total of 5 Google mini's in my home. 4x Gen 2's and 1x Gen 1.

When these devices are connected to the wifi (smart connect disabled, 2.4ghz band used) I experience random restarts of the 882. 5 or 6 times a day. Since disconnecting them the router has been up for 2 days.

Is there any known issues with these or something I can try?

Cheers
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 48964
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 882 issues with Google Nest Minis
« Reply #1 on: March 30, 2020, 08:16:12 AM »

Link>Welcome!

  • What region are you located?


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
  • What wireless modes are you using?
  • 2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
  • What wireless devices and total devices do you have connected?

What happens if you turn OFF all but 1 or 2 of the Minis and check operation with the router?
Enable Smart Connect and test.

  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
  Link> >FW Update Process
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!