• February 24, 2021, 04:10:18 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Dsr-250n port forwarding problem  (Read 2270 times)

crocoman

  • Level 1 Member
  • *
  • Posts: 2
Dsr-250n port forwarding problem
« on: July 03, 2019, 08:37:02 AM »

Hi all,

I hope you can give a hand here, I have configured a dsr-250n with 3 vlan correctly.

The default vlan 1 have cctv recorder connected that needs port 12345 open for external access.

I have created "CUSTOM SERVICE" with tcp/udp protocol and port 12345. Next, I added the firewall rule, wan -》vlan1 to recorder ip. I service field i choose the new one created for recorder but does not work.

Open port test of 12345 is "CLOSED" , if i put in the firewall rule service "ANY" port 12345 is open...

what doing i wrong? i would want only open 12345 port and using any service i am opening any port used for the recorded...

can you help me, please?

thanks,
regards.

p.s: sorry for my english.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49520
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Dsr-250n port forwarding problem
« Reply #1 on: July 03, 2019, 10:12:25 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

Be sure you have any uPnP features disabled for Port Forwarding configurations.
Be sure you are actively using the port before checking the port status.
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

crocoman

  • Level 1 Member
  • *
  • Posts: 2
Re: Dsr-250n port forwarding problem
« Reply #2 on: July 03, 2019, 10:37:56 AM »

Hi,

I’m not in from of the device, i dont know hw versión.

The firmware i think is 2.x what is current version?

Im in Spain using ONT to convert Isp fiber connection to ethernet.

Upnp disabled and the port is enable and listening because if i put any service on the firewall rule I can acceso from internet, for security i want only open port 12345

Thanks
Regards
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49520
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Dsr-250n port forwarding problem
« Reply #3 on: July 03, 2019, 10:49:06 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.