• November 15, 2019, 12:00:11 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSL-3785 - TCP or UDP not both!?  (Read 636 times)

DarkSynopsis

  • Level 1 Member
  • *
  • Posts: 2
DSL-3785 - TCP or UDP not both!?
« on: May 30, 2019, 03:18:06 AM »

Recently picked up a DSL-3785 its running firmware AU_1.03 which is the latest and HW Revision is B1, I'm having issues with Application/Port Forwarding, if you check the manual online (http://files.dlink.com.au/products/DSL-3785/Manuals/DSL-3785_B1_Manual_v1.00(DI).pdf) Page #49 it states I can do "TCP, UDP, or All Protocol" on the Protocol Type but I don't appear to have that option, I can only do TCP or UDP (https://i.imgur.com/QWHNpDe.png)

I've tried a factory reset, I've tried different browsers, nothing seems to make this option appear, I've even gone through Telnet and the help commands only states setting UDP or TCP mind you this is only on Port Forwarding I can't seem to find the Applications list but it shouldn't matter since that manual states you can do Both for Port Forwarding as well.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47908
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSL-3785 - TCP or UDP not both!?
« Reply #1 on: May 30, 2019, 06:58:27 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

GreenBay42

  • Administrator
  • Level 10 Member
  • *
  • Posts: 2224
Re: DSL-3785 - TCP or UDP not both!?
« Reply #2 on: May 30, 2019, 08:00:35 AM »

The manual may be based on an older firmware. The 1.03 firmware may have removed the all option which is very odd. Unfortunately you will have to create 2 rules if you need both UDP and TCP. Definitely contact tech support and they can let the engineers know to fix it.
Logged

DarkSynopsis

  • Level 1 Member
  • *
  • Posts: 2
Re: DSL-3785 - TCP or UDP not both!?
« Reply #3 on: June 01, 2019, 06:00:43 AM »

The manual may be based on an older firmware. The 1.03 firmware may have removed the all option which is very odd. Unfortunately you will have to create 2 rules if you need both UDP and TCP. Definitely contact tech support and they can let the engineers know to fix it.

Trying to create 2 rules just results in "This Trigger Port already exists"
Logged