• November 18, 2018, 05:30:25 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Multicast streaming not happening on DES-3552 switch  (Read 131 times)

Hussainqcs

  • Level 1 Member
  • *
  • Posts: 1
Multicast streaming not happening on DES-3552 switch
« on: October 18, 2018, 08:30:10 AM »

Hi,

I have Dlink DES-3552 on access layer and have Alcatel Lucent as Core switch

All the Source & Clients are in same vlan (vlan id :5) But from Alcatel they have enabled IP Multicast switching and core switches also they can able to see the stream in Alcatel switch But still in the Dlink i was unable to see the stream ?

Any help will be appreciated



#                        DES-3552P Fast Ethernet Switch
#                                Configuration
#
#                           Firmware: Build 2.60.017
#           Copyright(C) 2010 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
 

# STACK


# BASIC

# ACCOUNT LIST
# ACCOUNT END
# PASSWORD ENCRYPTION
disable password encryption
config serial_port auto_logout never


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
enable web 80
enable clipaging
config terminal width 80

# DEBUG


# STORM


# LOOP_DETECT

disable loopdetect

# GM

disable sim

# GM_H


# MIRROR



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
disable mirror

# QOS

enable hol_prevention
config 802.1p default_priority 1-52 0
config bandwidth_control 1-52 rx_rate no_limit
config per_queue bandwidth_control ports 1-52 0 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 1 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 2 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 3 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 4 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 5 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 6 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 7 min_rate  no_limit  max_rate no_limit


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config scheduling_mechanism ports 1-52 strict
config scheduling ports 1-52 0  weight 1
config scheduling ports 1-52 1  weight 2
config scheduling ports 1-52 2  weight 3
config scheduling ports 1-52 3  weight 4
config scheduling ports 1-52 4  weight 5
config scheduling ports 1-52 5  weight 6
config scheduling ports 1-52 6  weight 7
config scheduling ports 1-52 7  weight 8
config 802.1p user_priority ports 1-52 0  2
config 802.1p user_priority ports 1-52 1  0
config 802.1p user_priority ports 1-52 2  1
config 802.1p user_priority ports 1-52 3  3
config 802.1p user_priority ports 1-52 4  4
config 802.1p user_priority ports 1-52 5  5
config 802.1p user_priority ports 1-52 6  6
config 802.1p user_priority ports 1-52 7  7

# SYSLOG

config log_save_timing on_demand
disable syslog
config system_severity trap information


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               

# TRAF-SEGMENTATION

config traffic_segmentation 1-52 forward_list all

# SSL


# PORT

disable jumbo_frame
config ports 1-52 state enable
config ports 1-52 speed auto
config ports 1-52 flow_control disable
config ports 1-52 learning enable
config ports 1-52 mdix auto
config ports 49-50 medium_type fiber state enable
config ports 49-50 medium_type fiber speed auto
config ports 49-50 medium_type fiber flow_control disable
config ports 49-50 medium_type fiber learning enable
config ports 49-50 medium_type fiber mdix auto

# SFLOW


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               


# OAM


# MANAGEMENT

config snmp system_name lan_8th_floor
config snmp system_location 8th floor
disable snmp

# TRAP


# TR


# VLAN

enable pvid auto_assign
config vlan default delete 1-48
config vlan default add untagged 49-52
config vlan default advertisement enable


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
create vlan CCTV tag 2
config vlan CCTV add tagged 49
config vlan CCTV add untagged 5-25 advertisement disable
create vlan Data tag 3
config vlan Data add tagged 49 advertisement disable
create vlan voice tag 4
config vlan voice add tagged 49
config vlan voice add untagged 42-48 advertisement disable
create vlan IPTV tag 5
config vlan IPTV add tagged 49
config vlan IPTV add untagged 26-41 advertisement enable
create vlan BMS tag 6
config vlan BMS add tagged 49
config vlan BMS add untagged 1-4 advertisement disable
create vlan ACS tag 7
config vlan ACS add tagged 49 advertisement disable
disable gvrp
disable asymmetric_vlan
disable vlan_trunk
config port_vlan 1-4 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 6
config port_vlan 5-25 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 2


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config port_vlan 26-41 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 5
config port_vlan 42-48 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 4
config port_vlan 49-52 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 1

# PORT_SECURITY

config port_security system max_learning_addr no_limit
disable port_security trap_log
config port_security ports 1-52 admin_state disable max_learning_addr 1 lock_address_mode deleteonreset

# ACL


#CPU Interface Filter

disable cpu_interface_filtering

# SUBNETVLAN



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config vlan_precedence port 1-52 mac_based_vlan

# PROTOCOL_VLAN


# QINQ

config qinq ports 1-52  missdrop disable outer_tpid 0x8100
config qinq ports 1-52  add_inner_tag disable

# RSPAN

disable rspan

# 8021X

disable 802.1x

# guestvlan


# POE



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               

# FDB

config fdb aging_time 300

# VLANCounter


# ADDRBIND


# DHCPV6_SNOOPING


# NetBiosFilter


# RADIUS


# ND_SNOOPING




CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# DhcpServerScreening


# PPPoE


# sRED

disable sred

# ARPSpoofingPrevention


# MEF


# MAC_ADDRESS_TABLE_NOTIFICATION


# STP

config stp fbpdu disable



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# L2PT


# BPDU_PROTECTION

disable bpdu_protection

# SAFEGUARD_ENGINE


# BANNER_PROMP


# SSH


# TELNETS

enable telnet 23

# BCPING




CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# IGMP_MULTICAST_VLAN


# MLD_MULTICAST_VLAN


# SNTP

disable sntp

# MULTICAST_FILTER


# LACP


# IP

config ipif System ipaddress 192.168.0.24/24
config ipif System vlan default
config ipif System dhcpv6_client disable
disable autoconfig



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# SNMPv3


# VOICEVLAN


# ERPS

 disable erps

# CFM

disable cfm

# JWAC


# WAC

 disable wac

# LLDP



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
disable lldp

# MAC-based_Access_Control

 disable mac_based_access_control

# MCFILTER


# COMPOUND_AUTHENTICATION

 enable authorization attributes
 config authentication server failover block

# IGMP_SNOOPING

enable igmp_snooping
config igmp_snooping vlan_name default fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name default query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config igmp_snooping data_driven_learning vlan_name default expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name CCTV fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name CCTV query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name CCTV expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name Data fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name Data query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name Data expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name voice fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name voice query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name voice expiry_time 260 state enable aged_out disable


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config igmp_snooping vlan_name IPTV fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name IPTV query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name IPTV expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name BMS fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name BMS query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name BMS expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name ACS fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name ACS query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name ACS expiry_time 260 state enable aged_out disable

# MLDSNP


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               

disable mld_snooping

# ACCESS_AUTHENTICATION_CONTROL


# DHCP_LOCAL_RELAY

disable dhcp_local_relay

# AAA_LOCAL_ENABLE_PASSWORD


# DHCP_RELAY

disable dhcp_relay

# NDP

config ipv6 nd ns ipif System retrans_time 0

# ARP



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config arp_aging time 20
config gratuitous_arp send ipif_status_up disable
config gratuitous_arp send dup_ip_detected disable
config gratuitous_arp learning disable
disable gratuitous_arp ipif System trap
enable gratuitous_arp ipif System log
config gratuitous_arp send periodically ipif System interval 0

# DNSR

disable dnsr

# ROUTE

enable local_route ipv4
disable local_route ipv6

# PROUTE


# DHCP_SERVER




CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# RELAY6

disable dhcpv6_relay

#-------------------------------------------------------------------
#             End of configuration file for DES-3552P
#-------------------------------------------------------------------



Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46160
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Multicast streaming not happening on DES-3552 switch
« Reply #1 on: October 18, 2018, 11:35:35 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!