• September 16, 2019, 05:06:10 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Re-install firmware without web interface  (Read 1098 times)

daveoxford

  • Level 1 Member
  • *
  • Posts: 2
Re-install firmware without web interface
« on: June 17, 2018, 12:23:47 PM »

Hi

I have a 320 and appear to have bricked the firmware. I can't ping the IP address.

Is there another way I can re-install the firmware?

Hoping somebody can help!

Thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Re-install firmware without web interface
« Reply #1 on: June 18, 2018, 06:59:39 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

daveoxford

  • Level 1 Member
  • *
  • Posts: 2
Re: Re-install firmware without web interface
« Reply #2 on: June 19, 2018, 09:59:10 AM »

Thanks for that - I'll give them a try!
Logged

ivan

  • Level 8 Member
  • ***
  • Posts: 1446
Re: Re-install firmware without web interface
« Reply #3 on: June 24, 2018, 12:00:12 PM »

You might also go and have a read of the wiki at http://dns323.kood.org/start  where you will find the necessary information for a serial or JTAG  connection that you will need if you have bricked your unit.

Be aware if you use a serial connection you will need line level translation unit to convert the 5v signal from the PC to the 3.3v of the SOC of the unit.
Logged