• October 16, 2019, 10:51:53 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-880L FW v1.20 Build 01 - Official FW Release - WW Region!  (Read 5469 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Firmware:   v1.20 Build 01   03/28/2018   WW Region!
Revision Info:   
Problems Resolved:
1. Fix SharePort Plus utility and DLNA access
2. Update WPA2 security patch (KRACK) fix

NOTE: This version is from the EU region, however can be applied to NA region routers. if your DIR-880L router is working with out any issues, it's recommended to keep the current version of FW that is loaded unless your are effected by one of the fixes. Use at your own risk. NA region will post official FW as well.

Get it here:
EU Region:
DIR-880L
This is a two step FW update process. Please follow the included update process instructions in the zip file. There is two FW files that has to be used to complete the update fully.

Follow the >FW Update Process

Let us know how it works for you...
« Last Edit: September 05, 2018, 10:40:30 AM by FurryNutz »
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

hvgsel

  • Level 1 Member
  • *
  • Posts: 18
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #1 on: May 07, 2018, 04:02:31 AM »

Hi there,

I have this firmware installed and it works flawlessly.
The Krack fix i cannot check, but DLNA intermittent problems, which i had, seem to be fixed now.
I do not know if it was there in an earlier update, but you can now add an IP-reservation from the connected clients list. Before (at least untill V1.08B04) you had to wait until a device showed up there and then you could change it's credentials.

The fix consists of 2 seperate firmware updates, which have to be done after eachother, so read the readme first and....reset first.
You cannot return to earlier firmware after this update.

Good luck with it, Hugo
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #2 on: May 07, 2018, 09:01:22 AM »

Enjoy.  ;)

Hi there,

I have this firmware installed and it works flawlessly.
The Krack fix i cannot check, but DLNA intermittent problems, which i had, seem to be fixed now.
I do not know if it was there in an earlier update, but you can now add an IP-reservation from the connected clients list. Before (at least untill V1.08B04) you had to wait until a device showed up there and then you could change it's credentials.

The fix consists of 2 seperate firmware updates, which have to be done after eachother, so read the readme first and....reset first.
You cannot return to earlier firmware after this update.

Good luck with it, Hugo
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Nawaab

  • Level 1 Member
  • *
  • Posts: 5
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #3 on: May 07, 2018, 11:20:10 AM »

Hello,

I tried upgrading my DIR-880L from 1.08wwB06 to this firmware per the instructions, however, I receive an error when trying upload the first firmware file (1.10). I tried uploading the file via Chrome, Edge and Internet Explorer browsers, but none worked. I then tried uploading the second firmware file (1.20) and had no problem.

Is there any risk with not being able to install the first firmware file?

H/W: A2
Upgrading from firmware 1.08wwB06
Location: Toronto, Ontario , CANADA
ISP: Rogers Interent
« Last Edit: May 07, 2018, 11:30:33 AM by Nawaab »
Logged
Cable: 60mb/10Mb>Hitron CGN3AMF>DIR-880L (HW: A2, FW: 1.20B01) OS: Windows 10 x64

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #4 on: May 07, 2018, 04:03:14 PM »

Skip the intermediate file, v1.10 and apply the v1.20 file...

Hello,

I tried upgrading my DIR-880L from 1.08wwB06 to this firmware per the instructions, however, I receive an error when trying upload the first firmware file (1.10). I tried uploading the file via Chrome, Edge and Internet Explorer browsers, but none worked. I then tried uploading the second firmware file (1.20) and had no problem.

Is there any risk with not being able to install the first firmware file?

H/W: A2
Upgrading from firmware 1.08wwB06
Location: Toronto, Ontario , CANADA
ISP: Rogers Interent
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Nawaab

  • Level 1 Member
  • *
  • Posts: 5
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #5 on: May 08, 2018, 10:45:35 AM »

Thank you. That is what I have done and have not noticed any issues so far by skipping the first firmware file (1.10). The router is running smoothly.

Skip the intermediate file, v1.10 and apply the v1.20 file...

Hello,

I tried upgrading my DIR-880L from 1.08wwB06 to this firmware per the instructions, however, I receive an error when trying upload the first firmware file (1.10). I tried uploading the file via Chrome, Edge and Internet Explorer browsers, but none worked. I then tried uploading the second firmware file (1.20) and had no problem.

Is there any risk with not being able to install the first firmware file?

H/W: A2
Upgrading from firmware 1.08wwB06
Location: Toronto, Ontario , CANADA
ISP: Rogers Interent
Logged
Cable: 60mb/10Mb>Hitron CGN3AMF>DIR-880L (HW: A2, FW: 1.20B01) OS: Windows 10 x64

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #6 on: May 08, 2018, 05:06:54 PM »

Enjoy.  ;)

Thank you. That is what I have done and have not noticed any issues so far by skipping the first firmware file (1.10). The router is running smoothly.

Skip the intermediate file, v1.10 and apply the v1.20 file...

Hello,

I tried upgrading my DIR-880L from 1.08wwB06 to this firmware per the instructions, however, I receive an error when trying upload the first firmware file (1.10). I tried uploading the file via Chrome, Edge and Internet Explorer browsers, but none worked. I then tried uploading the second firmware file (1.20) and had no problem.

Is there any risk with not being able to install the first firmware file?

H/W: A2
Upgrading from firmware 1.08wwB06
Location: Toronto, Ontario , CANADA
ISP: Rogers Interent
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Mark_KF8RV

  • Level 2 Member
  • **
  • Posts: 76
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #7 on: July 05, 2018, 12:48:54 PM »

Months ago when I upgraded FW to 1.08 Build 06, the "Middle" software file installed fine.

Yesterday when I upgraded to FW 1.20 Build 01, the "Middle" software didn't work.  Based upon a prior post, I upgraded to 1.20 Build 01 anyways without the "Middle" software.

Just curious, what's the reason-purpose of the "Middle" firmware file, i.e. what does it do ? ? ?

Mark

Logged

GreenBay42

  • Administrator
  • Level 10 Member
  • *
  • Posts: 2194
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #8 on: July 05, 2018, 12:56:41 PM »

The "middle" firmware basically adds encryption to the firmware. If you try updating the router with the middle file and it fails, it means the encryption has already been added so you can skip it and upload the 2nd firmware.
Logged

Mark_KF8RV

  • Level 2 Member
  • **
  • Posts: 76
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #9 on: July 05, 2018, 03:24:03 PM »

Thank you for that explanation about the "Middle" firmware.

Logged

TwoWheels

  • Level 1 Member
  • *
  • Posts: 2
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - WW Region!
« Reply #10 on: April 18, 2019, 03:52:21 AM »

I tried getting this firmware today but the link only shows versions up to 1.07, whcih is LOWER than the 1.11 I already have! Is there a way to get this still?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - WW Region!
« Reply #11 on: April 18, 2019, 06:23:04 AM »

Link>Welcome!

  • What region are you located?

All FW versions are listed here:
https://support.dlink.com/ProductInfo.aspx?m=DIR-880L

Check the down menu that starts with Security Advertisement...

I tried getting this firmware today but the link only shows versions up to 1.07, whcih is LOWER than the 1.11 I already have! Is there a way to get this still?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - WW Region!
« Reply #12 on: April 18, 2019, 11:10:05 AM »

FYI:
http://forums.dlink.com/index.php?topic=74763.0

I tried getting this firmware today but the link only shows versions up to 1.07, whcih is LOWER than the 1.11 I already have! Is there a way to get this still?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

mcshaz

  • Level 1 Member
  • *
  • Posts: 1
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #13 on: July 23, 2019, 05:41:28 PM »

The "middle" firmware basically adds encryption to the firmware. If you try updating the router with the middle file and it fails, it means the encryption has already been added so you can skip it and upload the 2nd firmware.

I would like to move on from the 1.07 B08 firmware to the 1.20B02 (I am not having 'problems' per say, but patching out security vulnerabilities is important).

Flashing the firmware fails straight from 1.07B08, presumably because of the encryption in the firmware. Using the link
https://support.dlink.com/ProductInfo.aspx?m=DIR-880L there are no 'intermediate' versions between the 2 available for download. Is there any way to get the intermediate/encrypted FW ready binaries?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47843
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-880L FW v1.20 Build 01 - Official FW Release - EU Region!
« Reply #14 on: July 24, 2019, 06:19:37 AM »

Please download and install the FW files for the following version: v1.20B01-01-i3se BETA
There will be two files included with in this .zip file.

Once you have these installed, then upgrade to the last v1.20 version available dated 12/2018.

The "middle" firmware basically adds encryption to the firmware. If you try updating the router with the middle file and it fails, it means the encryption has already been added so you can skip it and upload the 2nd firmware.

I would like to move on from the 1.07 B08 firmware to the 1.20B02 (I am not having 'problems' per say, but patching out security vulnerabilities is important).

Flashing the firmware fails straight from 1.07B08, presumably because of the encryption in the firmware. Using the link
https://support.dlink.com/ProductInfo.aspx?m=DIR-880L there are no 'intermediate' versions between the 2 available for download. Is there any way to get the intermediate/encrypted FW ready binaries?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting