• December 12, 2018, 09:05:56 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 ... 7 8 [9]

Author Topic: Firmware 1.20B01 Released - SECURITY PATCH  (Read 15957 times)

MSuomi

  • Level 2 Member
  • **
  • Posts: 55
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #120 on: April 05, 2018, 04:01:13 AM »

As an update, I changed my VDSL-modem and decided to test throughput again.
Well, the result is the same as on my earlier 890l, QOS-page again is not saving the changes xD
The settings are ok for me at the time, though. So I don't believe I'm bothered to do a new RMA-run. If I need to change them, I just reset the whole machine and setup it again  :o
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46287
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #121 on: April 05, 2018, 10:42:33 AM »

Let us know how it turned out.

Yes, seem it is an A2. Thanks for the extra information, I never been able to get QoS setting stick which is my major pain. The other issue are just either poorly written software or due a bad unit. Because having to restart and/or reset regularly to get setting to stick is no fun, especially when you have time sensitive device that need to access the Net 24/7. This unit was bought to replace a router that I loved but died after many years of heavy duty services.:)

As someone suggested, I'll try to get in touch with regional Dlink see what they make of this.

Regards,

Zak
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46287
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #122 on: April 05, 2018, 10:44:32 AM »

Seems like this QoS UI problem has appeared again.

I would make contact with support again and let them know about it. Seems like this hasn't really been fully fixed.

Keep us posted.

As an update, I changed my VDSL-modem and decided to test throughput again.
Well, the result is the same as on my earlier 890l, QOS-page again is not saving the changes xD
The settings are ok for me at the time, though. So I don't believe I'm bothered to do a new RMA-run. If I need to change them, I just reset the whole machine and setup it again  :o
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Gattsu

  • Technical Engineer
  • Level 3 Member
  • *
  • Posts: 139
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #123 on: April 05, 2018, 02:38:38 PM »

May I know the exact steps taken to updating the firmware to 1.20? I would like to know so I can replicate this issue.

Are you wired or wireless to the router during the update?

The previous firmware version before the update?

As an update, I changed my VDSL-modem and decided to test throughput again.
Well, the result is the same as on my earlier 890l, QOS-page again is not saving the changes xD
The settings are ok for me at the time, though. So I don't believe I'm bothered to do a new RMA-run. If I need to change them, I just reset the whole machine and setup it again  :o
« Last Edit: April 05, 2018, 02:41:06 PM by Gattsu »
Logged

MSuomi

  • Level 2 Member
  • **
  • Posts: 55
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #124 on: April 05, 2018, 11:36:29 PM »

May I know the exact steps taken to updating the firmware to 1.20? I would like to know so I can replicate this issue.

Are you wired or wireless to the router during the update?

The previous firmware version before the update?

Yes, you may  ;)

I'm wired, RMA-router was 1.09 when it came and I updated it straight from UI until it was the latest version.
The earlier one I updated manually from latest (1.10?) to intermittent 1.11 and from there to 1.20.
And as a few people has said, QOS-page stops to save after about 3 days, with "Saving"-window just quickly flashing on screen, without the proper countdown as it does when saving properly...
Logged

Gattsu

  • Technical Engineer
  • Level 3 Member
  • *
  • Posts: 139
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #125 on: April 09, 2018, 08:07:35 AM »

May I know the exact steps taken to updating the firmware to 1.20? I would like to know so I can replicate this issue.

Are you wired or wireless to the router during the update?

The previous firmware version before the update?

Yes, you may  ;)

I'm wired, RMA-router was 1.09 when it came and I updated it straight from UI until it was the latest version.
The earlier one I updated manually from latest (1.10?) to intermittent 1.11 and from there to 1.20.
And as a few people has said, QOS-page stops to save after about 3 days, with "Saving"-window just quickly flashing on screen, without the proper countdown as it does when saving properly...

I recovery updated down to 1.09b14 and then used the GUI's automatic firmware upgrade to 1.11 and then 1.20. Messed with the QoS settings but saves any settings thrown at it within 15 seconds.

Is your 890 a rev. A2?


Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46287
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #126 on: April 09, 2018, 10:11:30 AM »

Please try changing the QOS settings after 3-5 days and see if anything happens.

What browser are you using?

I recovery updated down to 1.09b14 and then used the GUI's automatic firmware upgrade to 1.11 and then 1.20. Messed with the QoS settings but saves any settings thrown at it within 15 seconds.

Is your 890 a rev. A2?
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

MSuomi

  • Level 2 Member
  • **
  • Posts: 55
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #127 on: April 10, 2018, 12:18:34 AM »

May I know the exact steps taken to updating the firmware to 1.20? I would like to know so I can replicate this issue.

Are you wired or wireless to the router during the update?

The previous firmware version before the update?

Yes, you may  ;)

I'm wired, RMA-router was 1.09 when it came and I updated it straight from UI until it was the latest version.
The earlier one I updated manually from latest (1.10?) to intermittent 1.11 and from there to 1.20.
And as a few people has said, QOS-page stops to save after about 3 days, with "Saving"-window just quickly flashing on screen, without the proper countdown as it does when saving properly...

I recovery updated down to 1.09b14 and then used the GUI's automatic firmware upgrade to 1.11 and then 1.20. Messed with the QoS settings but saves any settings thrown at it within 15 seconds.

Is your 890 a rev. A2?

A1. And as FurryNutz posted below, whenever I reset the router, the saving of QOS-settings works properly for a while. I would say after 3 days it stops to work... Rebooting doesn't help, only a total reset.
Logged

Gattsu

  • Technical Engineer
  • Level 3 Member
  • *
  • Posts: 139
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #128 on: April 10, 2018, 11:17:44 AM »

Please try changing the QOS settings after 3-5 days and see if anything happens.

What browser are you using?

I recovery updated down to 1.09b14 and then used the GUI's automatic firmware upgrade to 1.11 and then 1.20. Messed with the QoS settings but saves any settings thrown at it within 15 seconds.

Is your 890 a rev. A2?

I've been using IE11 and FIrefox ESR but I will try changing the QoS after 3-5 days.
Logged

Gattsu

  • Technical Engineer
  • Level 3 Member
  • *
  • Posts: 139
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #129 on: April 13, 2018, 10:03:51 AM »

Please try changing the QOS settings after 3-5 days and see if anything happens.

What browser are you using?

I recovery updated down to 1.09b14 and then used the GUI's automatic firmware upgrade to 1.11 and then 1.20. Messed with the QoS settings but saves any settings thrown at it within 15 seconds.

Is your 890 a rev. A2?

I've been using IE11 and FIrefox ESR but I will try changing the QoS after 3-5 days.

My QoS page still working as expected.

You may need contact TS D-Link again and have them test the returned router.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46287
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #130 on: April 13, 2018, 10:20:30 AM »

Please give another 2 days to be sure Sir.
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!

Gattsu

  • Technical Engineer
  • Level 3 Member
  • *
  • Posts: 139
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #131 on: April 17, 2018, 07:24:20 AM »

Please give another 2 days to be sure Sir.

I have one set up as a camera network and it has been running for 13 days with QoS enabled. I made a few changes just now and it saves each time. So far so good. =)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 46287
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Firmware 1.20B01 Released - SECURITY PATCH
« Reply #132 on: April 17, 2018, 08:51:00 AM »

Thank you for your time Sir.

 ;)
Logged
"Nothing Funny about It...." We are not here to Impress anyone! You have a be a COMPETENT user first to under stand COMPETENT help!
Pages: 1 ... 7 8 [9]