• October 19, 2019, 07:55:35 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How to obtain a low latency video stream from the DCS-4703E?  (Read 2568 times)


  • Level 1 Member
  • *
  • Posts: 1
How to obtain a low latency video stream from the DCS-4703E?
« on: September 06, 2017, 08:53:40 AM »


when accessing the DCS-4703E camera with the browser there is the possibility of seeing the live video stream by means of an ActiveX control.
That stream looks great and has a very low latency.

However, when I attempt to get the stream using either HTTP or RTSP the resulting video is delayed a lot, like about 1,5 or 2 seconds.

How can we get rid of the delay? What is the URL for use with VLC for example?

Thanks and best regards,



  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47844
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: How to obtain a low latency video stream from the DCS-4703E?
« Reply #1 on: September 06, 2017, 10:23:36 AM »


  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

What Mfr and model is the main host router?

Probabably not a camera issue rather a process of everything logging in to the camera and getting video going. The delay isn't too long.
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.10 and .11  DHCP

See if any of these helps:
http://forums.dlink.com/index.php?topic=50328.0 and http://forums.dlink.com/index.php?topic=64975.0
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting