• February 22, 2020, 03:03:53 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: rs-232 Specification of 3828  (Read 4344 times)

mahdavidesign

  • Level 1 Member
  • *
  • Posts: 1
rs-232 Specification of 3828
« on: August 04, 2009, 11:41:36 PM »

Hi.
Can anybody tell me about pin out of rs-232 console port of des-3828, please(or any switch like this.)?
thank you.
Logged

~~Adam

  • Level 1 Member
  • *
  • Posts: 3
Re: rs-232 Specification of 3828
« Reply #1 on: October 07, 2009, 04:34:00 PM »

The switch specifically is a DCE device.
So for a computer to connect it's a straight through connection
So for a 9 pin D connectors.

YOUR PC (DTE)         DLINK (DCE)
Pin 2 = TX ---------- RX = Pin 2
Pin 3 = RX ---------- TX = Pin 3
Pin 5 = GND ------- GND = Pin 5

From the CLI manual for the 3800 it requires a VT-100 emulator.

I recommend Putty
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

9600, N, 8, 1 serial settings.

« Last Edit: October 07, 2009, 06:02:20 PM by ~~Adam »
Logged