• September 21, 2019, 10:08:59 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Forwarding Ports  (Read 3739 times)

geronimo78

  • Level 1 Member
  • *
  • Posts: 8
Forwarding Ports
« on: June 09, 2017, 11:29:25 AM »

Hi,
I have a DSR 1000AC (Hw : A1, Fw 3.10ww) and I try to have 3 different incoming ports to the same port number on 3 different IP addresses.
Example: incoming port 22 to 192.168.0.100 port 22
         incoming port 23 to 192.168.0.101 port 22
         incoming port 24 to 192.168.0.102 port 22

I have created 3 custum services :
   Rules name : Port22
   Type : TCP
   Source Start Port : 1
   Source Finish Port : 65535
   Destination Start Port : 22
   Destination Finish Port : 22

   Rules name : Port23
   Type : TCP
   Source Start Port : 1
   Source Finish Port : 65535
   Destination Start Port : 23
   Destination Finish Port : 23

   Rules name : Port24
   Type : TCP
   Source Start Port : 1
   Source Finish Port : 65535
   Destination Start Port : 24
   Destination Finish Port : 24

After I have created 3 firewall rules :
   From Zone : Insecure (WAN)
   To Zone : Secure (LAN)
   Service : Port22
   Action : Always allow
   Source Host : Any
   Destination : 192.168.0.100
   Translate Port : Off
   External Port : Dedicate Wan

   From Zone : Insecure (WAN)
   To Zone : Secure (LAN)
   Service : Port23
   Action : Always allow
   Source Host : Any
   Destination : 192.168.0.100
   Translate Port : On
   Translate port : 23
   External Port : Dedicate Wan

   From Zone : Insecure (WAN)
   To Zone : Secure (LAN)
   Service : Port24
   Action : Always allow
   Source Host : Any
   Destination : 192.168.0.100
   Translate Port : On
   Translate port : 24
   External Port : Dedicate Wan

I can access to IP_EXT:22 to 192.168.0.100:200
but IP_EXT:23 is closed and I can't acces to 192.168..0.101:22

Any body can help me
Thank
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47763
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Forwarding Ports
« Reply #1 on: June 09, 2017, 01:24:47 PM »


  • What region are you located?


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?

Is uPnP disabled on the router?
I don't see any firewall configurations for IP address .101.
Is there a Virtual Server feature on the DSR by chance?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

geronimo78

  • Level 1 Member
  • *
  • Posts: 8
Re: Forwarding Ports
« Reply #2 on: June 10, 2017, 12:01:41 AM »

I am located near Paris in France
I have a cable connection (1Gb/60Mb)
The uPnP service is disable
I make 2 mistakes when I have copied the configuration in the message :
for the second firewall rule, the destination is 192.168.0.101 and for the third is 192.168.0.102
I don't find Virtual server
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47763
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Forwarding Ports
« Reply #3 on: June 10, 2017, 02:34:06 PM »

If you disable the .100 rule, do any of the others work?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

geronimo78

  • Level 1 Member
  • *
  • Posts: 8
Re: Forwarding Ports
« Reply #4 on: June 11, 2017, 12:29:21 AM »

No, when .100 rule is disable, .101 and .102 rules doesn't work
I don't anderstand how the translate port feature works, I don't have found on the web, any documentation about translate port
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47763
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Forwarding Ports
« Reply #5 on: June 11, 2017, 10:24:18 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

geronimo78

  • Level 1 Member
  • *
  • Posts: 8
Re: Forwarding Ports
« Reply #6 on: June 12, 2017, 09:10:58 AM »

After several mails with local support the good way is :
I have created 3 custum services :
   Rules name : Port22
   Type : TCP
   Source Start Port : 1
   Source Finish Port : 65535
   Destination Start Port : 22
   Destination Finish Port : 22

   Rules name : Port23
   Type : TCP
   Source Start Port : 1
   Source Finish Port : 65535
   Destination Start Port : 23
   Destination Finish Port : 23

   Rules name : Port24
   Type : TCP
   Source Start Port : 1
   Source Finish Port : 65535
   Destination Start Port : 24
   Destination Finish Port : 24

Afer I have created 3 firewall rules :
   From Zone : Insecure (WAN)
   To Zone : Secure (LAN)
   Service : Port22
   Action : Always allow
   Source Host : Any
   Destination : 192.168.0.100
   Translate Port : Off
   External Port : Dedicate Wan

   From Zone : Insecure (WAN)
   To Zone : Secure (LAN)
   Service : Port23
   Action : Always allow
   Source Host : Any
   Destination : 192.168.0.101
   Translate Port : On
   Translate port : 22
   External Port : Dedicate Wan

   From Zone : Insecure (WAN)
   To Zone : Secure (LAN)
   Service : Port24
   Action : Always allow
   Source Host : Any
   Destination : 192.168.0.102
   Translate Port : On
   Translate port : 22
   External Port : Dedicate Wan
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47763
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Forwarding Ports
« Reply #7 on: June 12, 2017, 10:26:01 AM »

And this configuration works for you?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

geronimo78

  • Level 1 Member
  • *
  • Posts: 8
Re: Forwarding Ports
« Reply #8 on: June 15, 2017, 11:57:45 AM »

Yes, this configuration works well and thank for your help
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47763
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Forwarding Ports (RESOLVED)
« Reply #9 on: June 15, 2017, 02:12:44 PM »

Ok, good to hear. Enjoy.  ;)
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting