• December 12, 2019, 02:44:50 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: D-Link Network Assistant not working for Hardware Rev. B ?  (Read 1888 times)


  • Level 1 Member
  • *
  • Posts: 13
D-Link Network Assistant not working for Hardware Rev. B ?
« on: March 15, 2017, 02:11:03 PM »

Hi all

Since my three DGS-1100-08 work very stable with the latest firmware now, I decided to replace my last switch with a fourth DGS-1100-08. This time, I received a Hardware Rev. B1, the three old ones are A1.

I noticed that B1 doesn't get picked up by the D-Link Network Assistant. Is that correct?
On the other hand, i learned about the chrome extension. This one only picks up the new switch though.

Not a big problem, just wanted to ask here if someone can confirm that.

(also, the firmware versions are different. I assume Ver 1.00.016 actually is the latest one?)


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47982
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: D-Link Network Assistant not working for Hardware Rev. B ?
« Reply #1 on: March 16, 2017, 09:31:32 AM »

Possible that the utility only supports Rev A and Rev B only uses the browser...
I see Rev A FW here:
Select Rev A

There isn't any for Rev B and I presume that Rev A FW isn't compatible with Rev B.
« Last Edit: March 16, 2017, 09:33:15 AM by FurryNutz »
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting