• December 12, 2019, 02:58:28 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Options for External RTSP & HTTP settings on some camera models not available  (Read 1989 times)

alanazar

  • Level 1 Member
  • *
  • Posts: 21

Hello,

I have the following cameras:
2x DCS-2630L
2x DCS-2332L
2x DCS-5222LB1

The DCS-2630L software under Setup \ Network settings \ UPnP & UPnP port forward to define the external ports for HTTP\HTTPS\RTSP.

The other cameras only have the UPnP port forward option to 1 port which I'm assuming is the HTTP. The problem with this is it impossible to manage internal and external ports which I need to use.

So the question is: will these same options that exist on the 2630L be updated in the next firmware updates of the other models?

Thanks



Logged

rtchiu

  • Level 1 Member
  • *
  • Posts: 2

does DCS-5009L have rtsp url? i tried looking it up at the internet, especially at www.ispyconnect.com which has the most list of url for cameras it seems this model does not have rtsp support...
Logged

alanazar

  • Level 1 Member
  • *
  • Posts: 21

does DCS-5009L have rtsp url? i tried looking it up at the internet, especially at www.ispyconnect.com which has the most list of url for cameras it seems this model does not have rtsp support...

Not sure about your model but i looked online and it doesn't seem so. You should still be able to connect through http though.
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2110

does DCS-5009L have rtsp url? i tried looking it up at the internet, especially at www.ispyconnect.com which has the most list of url for cameras it seems this model does not have rtsp support...

I don't see anything in the manual. It is a lower end model camera.

ftp://ftp2.dlink.com/PRODUCTS/DCS-5009L/REVA/DCS-5009L_REVA_MANUAL_1.00_EN_US.PDF
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47980
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Some model cameras don't support the advanced uPnP configuration. Mostly automatic.
If you need to do any port configurations, you might disable uPnP and set up port forward configurations ON the main host router and disable uPnP there as well.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting