• January 24, 2021, 10:44:29 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: LACP fails between Dlink DGS-1510-52 and Juniper ex2200  (Read 4508 times)


  • Level 1 Member
  • *
  • Posts: 12
LACP fails between Dlink DGS-1510-52 and Juniper ex2200
« on: September 19, 2016, 11:22:47 PM »


In other post @PacketTracer user helped me creating a LACP between two identical Dlink Switches.

Now I have the challenge of interconnecing my Stack formed by two Dlink DGS-1510-52 with a Juniper EX2200 with an aggregation Link.

I spend more than 4 hours without success... Neither LACP nor "static aggregation" worked (Theoretically Dlink only support static LAG between Switches, isn't it?).

Simply there is no L3 link... I tried configuring LACP  to be a VLan access port on both ends, and a Trunk, without success.

So... any ideas or hints?

Sincerely: I'm using a too cheap model to do this "advanced" things? My workmate in the other band, which manages the Juniper EX2200, is laughing at me because these things get working in three seconds in Juniper EX2200... which costs the same as Dlink 1510  :-\ :-\ :-\ :-\ :-\

« Last Edit: September 19, 2016, 11:32:06 PM by anigwei »


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49466
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: LACP fails between Dlink DGS-1510-52 and Juniper ex2200
« Reply #1 on: September 20, 2016, 06:46:52 AM »

This is something you may want to ask D-Link support about and see if there is a better model out there that supports your needs.
Good Luck.
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.