• December 10, 2019, 03:51:09 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: nas port forwarding issue  (Read 1522 times)

jaxMedal

  • Level 1 Member
  • *
  • Posts: 1
nas port forwarding issue
« on: June 30, 2016, 03:44:47 AM »

I connect my nas(Synology DS3615xs) using DIR-880L and I set the static IP in this router.
Because I want to connect the web disk in my pc, I forward the port(445, 137-139, both TCP and UDP) to static IP in the DIR-880L.
However, the forwarding setting doesn't work. I can't connect the web disk in my pc.
It seem that the port doesn't be forwarded.
So, anyone have same issue and how can I fix this problem?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47968
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: nas port forwarding issue
« Reply #1 on: June 30, 2016, 06:46:03 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

How do you have the port forward configured on the router?
Is DNS relay enabled?
If you have PF enabled, do you have uPnP disabled?
Can you try setting up Virtual Server and enable uPnP and test in stead of using PF?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47968
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: nas port forwarding issue
« Reply #2 on: July 21, 2016, 07:34:54 AM »

Any status on this?  ???

I connect my nas(Synology DS3615xs) using DIR-880L and I set the static IP in this router.
Because I want to connect the web disk in my pc, I forward the port(445, 137-139, both TCP and UDP) to static IP in the DIR-880L.
However, the forwarding setting doesn't work. I can't connect the web disk in my pc.
It seem that the port doesn't be forwarded.
So, anyone have same issue and how can I fix this problem?
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting