• September 17, 2019, 02:25:47 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 932L-wireless  (Read 1521 times)

stevew295

  • Level 1 Member
  • *
  • Posts: 1
932L-wireless
« on: April 25, 2016, 01:28:30 PM »

New 932L with latest firmware.  Works fine wired but not wireless.  I searched and saw others with same problem, but not sure my problem is exactly the same. I believe I saw that on other posts, the camera would not hook up wirelessly unless you reduced WPA2.  I haven't tried that, but the setup utilitly DOES find the camera ok, and it does appear that the wireless settings have been applied.  But then get he message "can't connect to mydlink" or some such.  I believe the articles I saw were several years old, can anyone confirm that lowering WPA2 to WPA is the ONLY was to get it to work wirelessy?  Like I said, wired works fine, I can logon to mydlink and view the camera just fine.

Thanks, Steve
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 932L-wireless
« Reply #1 on: April 25, 2016, 02:09:48 PM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?
Can you connect and associate the camera to mydlink.com when it's wired?
Try reducing the WPA mode from WPA2 to WPA and TPIK and test. Then Try Mixed TPIK and AES. Then try WPA2 and TPIK only. Then try WPA2 and AES only and see...
Set radio mode from Mixed to single mode N and test.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47755
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 932L-wireless
« Reply #2 on: May 31, 2016, 07:31:27 AM »

Any status on this?  ???

New 932L with latest firmware.  Works fine wired but not wireless.  I searched and saw others with same problem, but not sure my problem is exactly the same. I believe I saw that on other posts, the camera would not hook up wirelessly unless you reduced WPA2.  I haven't tried that, but the setup utilitly DOES find the camera ok, and it does appear that the wireless settings have been applied.  But then get he message "can't connect to mydlink" or some such.  I believe the articles I saw were several years old, can anyone confirm that lowering WPA2 to WPA is the ONLY was to get it to work wirelessy?  Like I said, wired works fine, I can logon to mydlink and view the camera just fine.

Thanks, Steve
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting