• August 19, 2019, 03:34:17 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2]

Author Topic: 890 will not forward ports  (Read 5277 times)

Hard Harry

  • Guest
Re: 890 will not forward ports
« Reply #15 on: January 10, 2016, 11:05:53 PM »

What I did was not stress about it and  just put 1-65535 for each TCP and UDP.

Yea, that is wrong. If you forward all your ports to 1 PC, how can other devices on your network get any traffic? Not to mention it the major security risk. Might as well just put the PC in the router's DMZ.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 890 will not forward ports
« Reply #16 on: January 11, 2016, 07:52:24 AM »

For any XBL ports, I recommend narrowing down the global port values to 3070-3080 if you have multiple consoles. 3074 can't be used in a single game console configuration. Ports 53, 80, 88 and 443 are not needed in router configurations as most devices can gain access to these ports automatically and and as needed on there own with out any router help. Usually upnp helps this. 

For ping issues, I presume that port configurations is not the area that needs to be looked at. Other devices, ISP service or wireless configurations needs to be reviewed. I would turn OFF ALL wireless and wired devices accept for the devices that being tested and check for ping times and such. Ensure that the ISP service is good by checking ping times directly connected to the ISP modem/ONT. Ensure LAN cabling is good and CAT6 is recommended.

You might install v1.09 FW and test as well.

What I did was not stress about it and  just put 1-65535 for each TCP and UDP.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 890 will not forward ports
« Reply #17 on: January 15, 2016, 04:44:22 PM »

Any status on this?  ???
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

kirth99

  • Level 1 Member
  • *
  • Posts: 7
Re: 890 will not forward ports
« Reply #18 on: February 01, 2016, 02:35:26 PM »

NO status on this, I am still trouble shooting - this time it is with the ISP directly, to see if their maybe a issue involved with the ONT
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47689
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 890 will not forward ports
« Reply #19 on: February 01, 2016, 09:26:14 PM »

Keep us posted...
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: 1 [2]