• September 18, 2019, 08:40:40 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Configuration for two DCS-2132L cameras being port forwarded for off-site view  (Read 2280 times)

maximino

  • Level 1 Member
  • *
  • Posts: 1

I have been fighting with two DCS-2132L cameras and an Airport Extreme trying to do some off-site backup on a Sinology NAS.

Let me explain, at work I have two DCS-2132L cameras which I'm not able to see from home, where I have a NAS that I want to use to record. The cameras are set as follows:

Camera 1: http port: 80 - RTSP port: 554
Camera 2: http port: 1030 - RTSP port: 1040

On the Airport Extreme router I forward the following public ports to the internal fixed IP address for Camera 1:
public port: 80 - private port: 80 (both TCP for http)
public port: 554 - private port: 554 (both TCP* for RTSP)
And for the internal fixed IP address for Camera 2:
public port: 1030 - private port: 1030 (both TCP for http)
public port: 1040 - private port: 1040 (both TCP* for RTSP)

* I have also tried using UDP instead of TCP, without much luck**.

For Camera 1 using nmap I can see the ports are correctly set:

Code: [Select]
Nmap scan report for 10.0.1.202
Host is up (0.013s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
80/tcp  open  http
443/tcp open  https
554/tcp open  tsp

And same for Camera 2:

Code: [Select]
Starting Nmap 6.47 ( http://nmap.org ) at 2015-11-03 14:57 CST
Nmap scan report for 10.0.1.201
Host is up (0.0100s latency).
Not shown: 997 closed ports
PORT     STATE SERVICE
443/tcp  open  https
1030/tcp open  iad1
1040/tcp open  netsaint

And this are the ports that nmap find for my external IP:

Code: [Select]
80/tcp   open     http
554/tcp  open     rtsp
1030/tcp open     iad1
1040/tcp open     netsaint

I reckon this has to do with the RTSP port probably not being set correctly either on the camera or on the router, as I'm able to access the cameras using a web browser, so the http port is being forwarded correctly, but in the "LIVE VIDEO" tab where the video is supposed to stream I'm not able to see anything. And on my browser I can see the error: "Failed to load resource: the server responded with a status of 500 (Server Error)", when looking at the browser's console.

So there are a few questions:
Does RTSP needs another port to be forwarded/opened?
Does anyone has any experience with this kind of setup, and have it resolved?

I would really appreciate if anyone can please provide any insight.

Both cameras are using the latest Firmware version at the time of this post which I believe is 2.11.00.

** Quoting Obi-Wan: "In my experience, there's no such thing as luck."
« Last Edit: November 03, 2015, 10:03:36 PM by maximino »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47757
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Any status on this?  ???
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting