• September 21, 2019, 09:03:04 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Tablet will not connect  (Read 1080 times)

jarome

  • Level 2 Member
  • **
  • Posts: 27
Tablet will not connect
« on: June 04, 2015, 03:04:00 PM »

Smart Connect is just not smart enough. Upon more investigation, I have indeed seen it use Channels 6 and 11 in addition to Channel 1.
Today it decided to use Channel 11, and I could not get a proper connection, even though there was plenty of signal. The problem was that my Chromecast is also on Channel 11, and it was the same strength as the signal from the DIR-890L.  When I walked into the router room, it connected.

There seems to be a fundamental problem with the algorithm used: The router only sees the signals at the router location, which is not the same as the signals at the devices.

Will the 890L connect on channels other than 1, 6, and 11, which are all busy with neighbors traffic?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47763
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Tablet will not connect
« Reply #1 on: June 04, 2015, 03:58:32 PM »

For now, disable SC. I presume there maybe some development needed on it. D-Link is aware of the issues at hand. SC seems to work ok however I don't know how it handles wifi congested areas vs low or moderate WiFi neighborhoods like mine.

I presume CC acts as a client and not a AP?

You might want to phone D-Link support and talk to level 2 support about this...

v1.06 is not the last FW update and I don't know when the next release will be forth coming. I presume in the near future.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting