• February 28, 2021, 05:36:10 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: licensedRun - in the logging output  (Read 4321 times)

simpsonehh

  • Level 1 Member
  • *
  • Posts: 7
licensedRun - in the logging output
« on: April 21, 2015, 04:48:02 PM »

hello,

I enabled more logging and to check what is going on with the 250N.  the device is a few months old.
I have several entries for this and would like to know what it means.

[DSR-250N-]Tue Apr 21 17:38:33 2015(GMT-0500) [DSR-250N-][System][PLATFORM] licensedRun:338: Not able to accept connection from socket with newfd :-1 err:4:Interrupted system call


I also have these but been reviewing this post:  ( http://forums.dlink.com/index.php?topic=59242.0 )
[DSR-250N-]Tue Apr 21 17:37:23 2015(GMT-0500) [DSR-250N-][Kernel][KERNEL] [86674.600000] <sppe_cmd_arp> Fail to read IPv4 ARP entry, IP 0x0a0a0a5c
[DSR-250N-]Tue Apr 21 17:37:23 2015(GMT-0500) [DSR-250N-][Kernel][KERNEL] [86676.230000] <sppe_cmd_arp> Fail to read IPv4 ARP entry, IP 0x0a0a0a53
[DSR-250N-]Tue Apr 21 17:37:23 2015(GMT-0500) [DSR-250N-][Kernel][KERNEL] [86676.630000] <sppe_cmd_arp> Fail to read IPv4 ARP entry, IP 0x0a0a0a4c




thanks in advance.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49522
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: licensedRun - in the logging output
« Reply #1 on: April 22, 2015, 07:45:48 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

simpsonehh

  • Level 1 Member
  • *
  • Posts: 7
Re: licensedRun - in the logging output
« Reply #2 on: April 22, 2015, 04:50:50 PM »

running the 2.01_WW code
hw v A2
USA
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49522
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: licensedRun - in the logging output
« Reply #3 on: April 23, 2015, 06:50:56 AM »

  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

simpsonehh

  • Level 1 Member
  • *
  • Posts: 7
Re: licensedRun - in the logging output
« Reply #4 on: April 25, 2015, 05:56:37 PM »

Hello,
I do not recall if before hand was done. 

I am pretty sure that after the update, a reset was done.

I can do another reset as the configuration is not detailed.  would that be recommended. 

is there a way to determine what the licenserun is referring to?

thanks.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49522
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: licensedRun - in the logging output
« Reply #5 on: April 26, 2015, 09:00:35 AM »

You'll need to contact D-Link support and ask them what this means or if it's impacting operation of the router...

Let us know how it goes...
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.