Hello.
I have a WBR-1310 router. I factory reset it and upgraded to
Firmware Version
4.13
Firmware Date
Tue 07 Aug 2007
This D-link router is not connected to a modem or WAN. I have 2 computers plugged into 2 of the LAN ports (FYI these 2 computers are also connected through wireless to my actual internet modem) and the D-link works great.
However as soon as I plug MyLiveBook into the router the router "resets." All the lights turn off except the power LED and no connection can be made through this router. Waiting a bit the LEDS light up in a row then turn off again.
If I power off the router and plug the MyBookLive in then power it on, wait a minute then plug in ONE connection from a PC into the LAN port the PC can now see the MyBookLive. However plugging in another PC into the LAN port "resets" the router again.
So it seems I can only awkwardly have only 1 PC connected at a time after I plug in the mybooklive in order to get it to work.
Also connecting a second PC through the wireless also resets the router.
I tried assigning a static IP address to mylivebook and my pcs but I can't get it working.
Also tried disabling DNS Relay and turning off DHCP server.
Here are my settings
Router IP address 10.0.0.1
Default Subnet mask 255.255.255.0
Local domain name blank
PC 1
ip address 100.0.0.100
subnet mask 255.255.255.0
gateway 10.0.0.1
dns server 10.0.0.1
PC 2
ip address 100.0.0.103
subnet mask 255.255.255.0
gateway 10.0.0.1
dns server 10.0.0.1
mylivebook hard drive
10.0.0.200
255.255.255.0
gateway 10.0.0.1
dns 10.0.0.1