D-Link Forums

The Graveyard - Products No Longer Supported => Routers => WBR-1310 => Topic started by: pindola on April 26, 2014, 10:52:55 AM

Title: Router not working with WD MyBookLive
Post by: pindola on April 26, 2014, 10:52:55 AM
Hello.
I have a WBR-1310 router. I factory reset it and upgraded to
 Firmware Version   
4.13
Firmware Date      
Tue 07 Aug 2007

This D-link router is not connected to a modem or WAN. I have 2 computers plugged into 2 of the LAN ports (FYI these 2 computers are also connected through wireless to my actual internet modem) and the D-link works great.

However as soon as I plug MyLiveBook into the router the router "resets." All the lights turn off except the power LED and no connection can be made through this router. Waiting a bit the LEDS light up in a row then turn off again.

If I power off the router and plug the MyBookLive in then power it on, wait a minute then plug in ONE connection from a PC into the LAN port the PC can now see the MyBookLive. However plugging in another PC into the LAN port "resets" the router again.

So it seems I can only awkwardly have only 1 PC connected at a time after I plug in the mybooklive in order to get it to work.

Also connecting a second PC through the wireless also resets the router.

I tried assigning a static IP address to mylivebook and my pcs but I can't get it working.
Also tried disabling  DNS Relay and turning off DHCP server.

Here are my settings

Router IP address 10.0.0.1
Default Subnet mask 255.255.255.0
Local domain name blank

PC 1
ip address 100.0.0.100
subnet mask 255.255.255.0
gateway 10.0.0.1
dns server 10.0.0.1

PC 2
ip address 100.0.0.103
subnet mask 255.255.255.0
gateway 10.0.0.1
dns server 10.0.0.1

mylivebook hard drive
10.0.0.200
255.255.255.0
gateway 10.0.0.1
dns 10.0.0.1
Title: Re: Router not working with WD MyBookLive
Post by: FurryNutz on April 28, 2014, 11:42:50 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)



Try a reset and see if default settings work?

I recommend using DHCP IP addresses and used Reserved IPs ON the router for all devices and not using static addresses.

Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)
Title: Re: Router not working with WD MyBookLive
Post by: FurryNutz on May 26, 2014, 04:54:08 PM
Any status on this?  ???

Hello.
I have a WBR-1310 router. I factory reset it and upgraded to
 Firmware Version   
4.13
Firmware Date      
Tue 07 Aug 2007

This D-link router is not connected to a modem or WAN. I have 2 computers plugged into 2 of the LAN ports (FYI these 2 computers are also connected through wireless to my actual internet modem) and the D-link works great.

However as soon as I plug MyLiveBook into the router the router "resets." All the lights turn off except the power LED and no connection can be made through this router. Waiting a bit the LEDS light up in a row then turn off again.

If I power off the router and plug the MyBookLive in then power it on, wait a minute then plug in ONE connection from a PC into the LAN port the PC can now see the MyBookLive. However plugging in another PC into the LAN port "resets" the router again.

So it seems I can only awkwardly have only 1 PC connected at a time after I plug in the mybooklive in order to get it to work.

Also connecting a second PC through the wireless also resets the router.

I tried assigning a static IP address to mylivebook and my pcs but I can't get it working.
Also tried disabling  DNS Relay and turning off DHCP server.

Here are my settings

Router IP address 10.0.0.1
Default Subnet mask 255.255.255.0
Local domain name blank

PC 1
ip address 100.0.0.100
subnet mask 255.255.255.0
gateway 10.0.0.1
dns server 10.0.0.1

PC 2
ip address 100.0.0.103
subnet mask 255.255.255.0
gateway 10.0.0.1
dns server 10.0.0.1

mylivebook hard drive
10.0.0.200
255.255.255.0
gateway 10.0.0.1
dns 10.0.0.1