Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jan.renzlow]

Hallo,
my network is organized like this

ISP -> cable modem -> DIR 615 Rev. H -> LAN with PCs

IP of my Cable-Modem 192.168.0.100
IP od Dir-615 Rev. H 192.168.2.1  Subnet Mask 255.255.255.0

How can I configure my routing table in http://192.168.2.1/adv_routing.htm to get direct access to the website of my cable modem?

I've an idea - but I'm not really sure. This is the reason for this question.

Thanks for your answer in advance.

[FurryNutz]

• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Modem Mfr. and model # do you have?
• Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
• What ISP Modem service link speeds UP and Down do you have?
• If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.

[FurryNutz]

Any status on this? 

Hallo,
my network is organized like this

ISP -> cable modem -> DIR 615 Rev. H -> LAN with PCs

IP of my Cable-Modem 192.168.0.100
IP od Dir-615 Rev. H 192.168.2.1  Subnet Mask 255.255.255.0

How can I configure my routing table in http://192.168.2.1/adv_routing.htm to get direct access to the website of my cable modem?

I've an idea - but I'm not really sure. This is the reason for this question.

Thanks for your answer in advance.