• August 13, 2020, 10:55:33 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Video Clip FTP send next FTP after...  (Read 2194 times)


  • Level 1 Member
  • *
  • Posts: 1
Video Clip FTP send next FTP after...
« on: May 25, 2014, 02:46:58 AM »

Hi there,

I'm new here.
I purchased an DCS 942L a few days ago. I like this cam.
There's a little problem for me. Can I extend the time for the Video Clip, 10 sec is a bit too less. On sd card i have 60secs video time, this is OK, but uncomortable for me to check outside my lan.
My NAS is the FTP target an i have secure access to this all over the world.

so my question, can i access the video clip ftp time on the DCS?
Where could i change that parameters? On the cam itself (telnet) ?

Wo could help me?

aah, is there an alternative firmware, like DD-WRT?

actually xubuntu 14.04, tplink with dd-wrt and fritzbox 7360


  • Level 10 Member
  • *****
  • Posts: 2186
Re: Video Clip FTP send next FTP after...
« Reply #1 on: May 25, 2014, 09:04:25 PM »

Unlikely.  My 2132l has 13 second ftp video clip.

My 2230 has 3 minute video files to SD for 24x7.

2230 has 100 seconds Max duration but Max of 5000 kbytes which is pathetic at HD levels. Would need to tone down to poor video quality and very low fps to get that.

Motion detection to SD card video files is bigger on the cams.