• December 06, 2019, 06:02:46 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Default Port Issue  (Read 3883 times)

Mymgb

  • Level 1 Member
  • *
  • Posts: 6
Default Port Issue
« on: May 10, 2014, 12:31:21 PM »

I recently purchased the DCS-933L camera to monitor my vacation home. I have 4 other webcams by Panasonic
configured and running. When I installed this camera the DCS933L, it conflicted with one of the Panasonic cameras and both were configured to  Port 80. I would appreciate a step by step instruction on how to change the port to 8080 or another 4 digit port. I use 5 digit ports generally for the Panasonic cameras with that one camera exception.
Thanks in advance for your help
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Default Port Issue
« Reply #1 on: May 10, 2014, 01:59:24 PM »

Do you use port forwarding? What router do you own?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Default Port Issue
« Reply #2 on: May 10, 2014, 02:00:43 PM »

Please refer to the FAQ post titled "DCS Network Cameras - Using Port Forwarding to Access a Camera from the Internet " located in the following thread: Network Cameras - Important Posts & Information
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

Mymgb

  • Level 1 Member
  • *
  • Posts: 6
Re: Default Port Issue
« Reply #3 on: May 11, 2014, 05:03:20 AM »

Thank you. I have a cCisco E3000 Linksys and the Panasonic cameras are not on port forwarding
Cheers
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Default Port Issue
« Reply #4 on: May 12, 2014, 06:16:56 AM »

Did that post help you out enough to move forward or do you have additional questions?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

Mymgb

  • Level 1 Member
  • *
  • Posts: 6
Re: Default Port Issue
« Reply #5 on: May 21, 2014, 09:29:50 AM »

Am away from all cameras for a few days but will try. How is tech support on these issues?
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Default Port Issue
« Reply #6 on: May 21, 2014, 10:18:09 AM »

I can't say as I haven't leveraged the toll free technical support for this type of application.  Setting up port forwarding isn't too difficult. You'll need to log into your router web UI and find the port forwarding page. The only key piece of information you really need is the camera IP address and choosing a port to forward to.  The post I provided should give a pretty good understanding of what's required.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC