Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JavaLawyer]

D-Link published DNR-322L firmware version 2.00b07, available for download here: DNR-322L - Firmware v2.00b07

Post your comments and observations here! 

[JavaLawyer]

The firmware release notes / change log were not yet published for this latest version.

[butlercj]

1.  Java apps to view live video and playback can't get this to work yet but it may be java security issues on my computer.
2.  Direct support for DCS-5020L Cameras.

Charlie

[arlomiller]

For me, this firmware update is a disaster.  I cannot get live view, playback, or recording to work.  I think it turned my DNR-322 into a brick!

[JavaLawyer]

Lost "Live View" after updating to Java Version 7 Update 51

The following procedure can be used to adjust the Java security exceptions in Windows after updating to the latest Java version.

• Open the Start Menu on the bottom left of the Windows Task Bar
• Expand All Programs and navigate to the Java folder
  
• Open Configure Java inside the Java folder
  
• The Java Control Panel will open in a new window
  
• Select the Security tab
  
• Press the Edit Site List button
  
• Press the Add button and enter the D-Link Cloud camera URL or IP address
  
• Press OK (Edit Site List window will close)
  
• Press OK (Java Control Panel window will close)
  
  

Note: Selecting Java from the Windows Control Panel may not provide access to the Edit Site List option on all PCs. The above navigation path must be used to access these settings.

[sim]

The firmware release notes / change log were not yet published for this latest version.

Can we please have a change log.

[JavaLawyer]

D-Link posted an updated user manual for firmware version 2.00: DNR-322L - User Manual (FW v2.00)

[JavaLawyer]

Firmware: 2.00b07 - Date: 12/26/2013

• [New Feature] Support push notification with D-ViewCam mobile (Android v1.2 and iOS v1.3)
• [New Feature] Support cross browser include MS-IE, Mac Safari, Chrome with partial function (Note: the following functions are not supported in Safari and Chrome: (a) Live Viewer: Preset/E-Map/Fix Aspect Ratio/ Full screen/Auto Scan/Manual Recording/Remote IO/Logout server and (b) Playback: Smart search/Print/Backup/Image Enhancement/Logout Server
• [New Feature] Support Win8 (Not including Metro Mode)
• [New Feature] Support IE10
• [New Feature] Support new IP cameras: DCS-932L/2136L/3010/3130/5010L/5020L/6513
• [Enhancement] Add “ manual record” option for admin to enable and disable in user management
• [Enhancement] Remove second stream hint
• [Enhancement] Modified OSD/Region function name in snapshot dialog
• [Enhancement] Super model enhancement (NIPCA 1.9.5)
• [Enhancement] Extend the time out mechanism of camera UPnP search
• [Bug Fix] DBG13010374 When I tried to use IE 10 to test , in Live Video, right click mouse on one of DCS, but the pop up window did not show correct option, please check attachment
• [Bug Fix] DBG12090172 Save Settings icon would be grey after change the Display mode of DCS-6010L
• [Bug Fix] DBG12070098 There is no digital signature on the tab in NVR AP.
• [Bug Fix] DBG12060231 There Digital signature is wrong on Playback.exe after installation.
• [Bug Fix] DBG12050172 DUT make DCS-6616 to focus near/far failed.
• [Bug Fix] DBG12100166 IE 10 cannot work , after installing necessary component (D-LinkNVS322.cab) twice but still cannot show live view
• [Bug Fix] DBG12090226 Convert a recording file by NVR Basic would be failed
• [Bug Fix] DBG12090209 The web browser would be crashed when start to convert a video file
• [Bug Fix] DBG11080015 Video quality of a exported avi file would be poorer than playback
• [Bug Fix] DBG11100238 A warning message would popup after live view for more than 60 hours
• [Bug Fix] Fixed email show “NVRmini” bug
• [Bug Fix] Modify the default setting in server and AP. (Please refer to note)
• [Bug Fix] Fixed the issue that error message “The format of URL login is invalid” would pop-up after user apply camera settings
• [Bug Fix] Fixed the issue that Live view/playback cannot work after enable SSL in WEB GUI
• [Bug Fix] Fixed the issue that NVR response failed for IP camera search
• [Bug Fix] Fixed the bug that DCS-5010L/5020L audio support fail
• [Bug Fix] Fixed the bug that install wizard can’t search camera
• [Bug Fix] Security - Authentication bypass vulnerability
• [Bug Fix] Security - Remote Unauthenticated Information Disclosure Vulnerability
• [Bug Fix] Security - Remote unauthenticated arbitrary firmware upload vulnerability
• [Bug Fix] Security - Remote unauthenticated Denial-of-Service Vulnerability
• [Bug Fix] Security - Remotely create a new USER
• [Bug Fix] Security - Remote admin password reset
• [Bug Fix] Modify copyright format
• [Bug Fix] Fix HTTPs (advance setting) connection issue with mydlink portal
• [Bug Fix] Fix re-start NVR service after unplug the USB cord on a UPS
• [Bug Fix] Fix login DUT as a new user account via HTTPS port 4433 failed and would redirect to HTTP web UI
• [Bug Fix] Fix restart samba when change date/time, NTP setting
• [Known Error] DCS-6010L switch current view “when display mode is 1P2R, user shall click down-left corner to switch to up-right view.”
• [Known Error] DCS-6915 - Motion detection and IO can only trigger once when camera connects to NVR
• [Known Error] DCS-6915 - Do not support G.726 audio codec
• [Known Error] DCS-7413: When frame rate is 1fps, camera would disconnected with NVR easily
• [Known Error] DCS-5605/5635: camera will reboot when switch to dual Stream
• [Known Error] DCS-3112: Preset01 will be overwrited by Preset02, so it won’t find Preset01 when it executes Patrol
• [Known Error] Chrome on MAC is not supported because of JAVA compatibility issue http://java.com/en/download/faq/chrome.xml
• [Known Error] When user remotely watches video which resolution is higher than D1 on non-IE browsers, Live view would crash
• [Known Error] When user remotely watches video which resolution is higher than D1 on MAC, it will pop-up error message. User only needs to select stream profile low/minimum for avoiding this issue

DNR-322L - Cumulative Firmware Release Notes

[JavaLawyer]

D-Link updated the list of compatible D-Link cameras for firmware version 2.00b07: DNR-322L - Compatible Cameras

[Sgleong]

Hi, I,m new to this forum . I,m having few problem after upgraded to v2.00b07 . It should be all cause by 1 problem .

1. Setup > Recording Schedule > Manual Record : "Enabled" .
   
 - If i,m not wrong. , it should be "Disable" . No matter how I change my settings(Recording Mode) , it keep
   showing "Enabled" .
   
 - I've called up dlink CS to troubleshoot this issue , but can't resolve . Advise me to bring down to the CS to
   check .

 - Dlink CS replaced another unit with v2.00b07 firmware upgraded . Bring back setup everything was fine .
   2 days later found device forgotten to not update on mydlink account , so arrange the configuration .

 - After config the settings found "Manual Record : "Enabled"" again .

 - Tried System Restart, Restore To Factory Default Settings & all don't work .

 - Restore To Factory Default Settings don't even change anything , only password reset , the others camera
    settings still around .

2. Status > Camera Settings

 - Connection Status : Connected

 - Recording Status : No Recording

3. Live Video

 - Camera Played : Recording Mode not appeal on the screen(round icon in red & blue) .

4. Live Video

 - All camera icon was played & logout server , relogin & camera not on play mode .


Hope someone can help me on all this issue .

Thanks & Regards
Sgleong .

[FurryNutz]

FYI:
http://forums.dlink.com/index.php?topic=56542.msg255169#msg255169

[wingsfan87]

What about adding a feature to disable UPNP on the NVR itself? The DLINK cameras that I have all have this option but the NVR doesn't.

[FurryNutz]

May not be any need to disable uPnP on this DNR as most users only have one DNR.

What about adding a feature to disable UPNP on the NVR itself? The DLINK cameras that I have all have this option but the NVR doesn't.

[wingsfan87]

There definitely is a need as UPNP is totally unsecure for this DNR-322L. I want to have UPNP open for a few other devices for gaming like my PS4 on my network but not for this DNR. This DNR automatically opens a hole to the internet and exposes it. That's why there have been several security patches. (see article http://www.pcworld.com/article/2045643/vulnerabilities-in-dlink-network-video-recorders-enable-remote-spying-researcher-says.html)

I want the ability to turn off UPNP for this device but leave it available for my PS4 to use on my network. The cameras I have disabled. I get access to the DNR and cameras through MyDlink.com instead of directly accessing it through my local ISP IP.

I did a search on SHODAN.IO and at one time because I had UPNP enabled it showed all my cameras and DNR as open to the internet. This is not good. i quickly disabled UPNP totally on my router and then disabled it on the cameras. I want the same ability to disable it on the DNR.

While we are on the subject

There is a problem with how it handles motion detection. It runs all the time instead of working with motion detection. Even though the setting is set for on motion event only.

[FurryNutz]

What FW version are you currently using?

There definitely is a need as UPNP is totally unsecure for this DNR-322L. I want to have UPNP open for a few other devices for gaming like my PS4 on my network but not for this DNR. This DNR automatically opens a hole to the internet and exposes it. That's why there have been several security patches. (see article http://www.pcworld.com/article/2045643/vulnerabilities-in-dlink-network-video-recorders-enable-remote-spying-researcher-says.html)

I want the ability to turn off UPNP for this device but leave it available for my PS4 to use on my network. The cameras I have disabled. I get access to the DNR and cameras through MyDlink.com instead of directly accessing it through my local ISP IP.

I did a search on SHODAN.IO and at one time because I had UPNP enabled it showed all my cameras and DNR as open to the internet. This is not good. i quickly disabled UPNP totally on my router and then disabled it on the cameras. I want the same ability to disable it on the DNR.

While we are on the subject

There is a problem with how it handles motion detection. It runs all the time instead of working with motion detection. Even though the setting is set for on motion event only.