• December 14, 2019, 04:42:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-933L Motion Trigger  (Read 8904 times)

noseph

  • Level 1 Member
  • *
  • Posts: 8
DCS-933L Motion Trigger
« on: November 11, 2013, 12:49:47 PM »

I am getting motion triggers that appear to be interference. Also in general the right 1/3rd of the screen is shifted to the left side. See link for one of the images I am getting.

https://copy.com/CdkYL
Logged

paulsson.henrik

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-933L Motion Trigger
« Reply #1 on: November 13, 2013, 01:22:58 AM »

I am getting the exact same thing, both the interference and the shifted image. This triggers the motion detection, sending me an email every five minutes (sometimes more often, sometimes less).

I does not happen during night time (I dont use night mode), only during the day. My camera sits on a box, and itīs about 1 meter away from other electrical equipment.
Logged

Jejje

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-933L Motion Trigger
« Reply #2 on: November 17, 2013, 11:54:29 PM »

I have the exact same problem.
When can we expect a new firmware thats correcting this problem?
Logged

HWAM

  • Level 2 Member
  • **
  • Posts: 82
Re: DCS-933L Motion Trigger
« Reply #3 on: December 09, 2013, 03:51:19 AM »

I have the exact same problem.

Motion detection is useless with this bug.

:'( :'( :'(
« Last Edit: December 10, 2013, 03:59:38 AM by HWAM »
Logged

gajego

  • Level 2 Member
  • **
  • Posts: 31
Re: DCS-933L Motion Trigger
« Reply #4 on: March 12, 2014, 11:59:21 AM »

I have the exact same problem.

Motion detection is useless with this bug.

:'( :'( :'(

I have the same issue:
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-933L Motion Trigger
« Reply #5 on: March 17, 2014, 07:00:42 AM »

I'll forward this additional post to D-Link for review.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-933L Motion Trigger
« Reply #6 on: March 26, 2014, 05:51:40 AM »

D-Link expanded the release notes for the latest DCS-933L firmware version 1.03b08 (security update). There are additional changes that were not documented in the first set of release notes: DCS-933L - Cumulative Firmware Release Notes

There are two particular bug fixes that leave me wondering if the issue described in this thread was addressed. The release notes entries are a bit ambiguous:

  • [Bug Fix] Adjust sensor settings for video flash issue happened sometimes
  • [Bug Fix] Fix bad frame issue happened sometimes

I'm not sure how to interpret this. . .  :-\

Have any DCS-933L owners who updated with the security update noticed any improvement on the image artifacts discussed in this thread?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

HWAM

  • Level 2 Member
  • **
  • Posts: 82
Re: DCS-933L Motion Trigger
« Reply #7 on: March 26, 2014, 06:02:43 AM »

I don't have the guts to update...

Who wants to test??

 ;D
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-933L Motion Trigger
« Reply #8 on: March 26, 2014, 06:20:20 AM »

I don't have the guts to update...

Who wants to test??

 ;D

This is a critical security update with some additional features added:
Network Cameras - Security Patch for Select Cloud Camera Models [2/25/2014]

I've applied the security upgrade to all my Cloud cameras without issue, but haven't had time to test whether this artifact issue was addressed or not. Again, the release notes were a bit ambiguous, so I'm not sure if those two fixes refer to the issue described in this thread.  ???  :-\
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

Banneke

  • Level 1 Member
  • *
  • Posts: 12
Re: DCS-933L Motion Trigger
« Reply #9 on: March 31, 2014, 11:19:41 AM »

I've updated two camera's of the eight I use and had ZERO false detections or false triggers in the last 24 hours..  :o  ;D
Logged

HWAM

  • Level 2 Member
  • **
  • Posts: 82
Re: DCS-933L Motion Trigger
« Reply #10 on: March 31, 2014, 11:28:11 AM »

I also updated my cam and also zero false detections the last days. I hope it stays this way. I am positive.   ;D

Finally after more than 4 months.

Pppfff
« Last Edit: March 31, 2014, 11:39:24 AM by HWAM »
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-933L Motion Trigger
« Reply #11 on: March 31, 2014, 11:53:23 AM »

I also updated my cam and also zero false detections the last days. I hope it stays this way. I am positive.   ;D

Finally after more than 4 months.

Pppfff

Excellent! Great news!  ;)
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

HWAM

  • Level 2 Member
  • **
  • Posts: 82
Re: DCS-933L Motion Trigger
« Reply #12 on: April 03, 2014, 07:57:45 AM »

I can tell you that the v1.03b08 is much better. I'm running 640x480 - H.264 - 1.5Mbps - fps30.
I mail my motion detected (40%) movies, 8 seconds, to keep the avi size acceptable. And I upload the motion detected movies (15 seconds) to a FTP server. Until now no false detections.  ;D

I think they did a good job. Unfortunately without any communication during the development process. I still think that's a very bad think D-Link!!!! We were waiting 4 months without any status update.  >:(

Greetings.

 
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-933L Motion Trigger
« Reply #13 on: April 03, 2014, 08:15:42 AM »

I can tell you that the v1.03b08 is much better. I'm running 640x480 - H.264 - 1.5Mbps - fps30.
I mail my motion detected (40%) movies, 8 seconds, to keep the avi size acceptable. And I upload the motion detected movies (15 seconds) to a FTP server. Until now no false detections.  ;D

Thanks for your continued feedback. I hope other DCS-933L owners post their experience as well to validate that everything has in fact been resolved. I'd feel more confident proclaiming success with at least three people offering similar results.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-933L Motion Trigger
« Reply #14 on: April 08, 2014, 06:48:27 AM »

Call for user feedback...

At least two users of the new v1.03b08 firmware has reported that this latest firmware has corrected the image artifacts that caused false motion detection triggers in earlier firmware versions.

If you installed this latest firmware, please post your findings!
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC