• October 25, 2014, 06:50:37 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in which we have created boards at this time.

Author Topic: DNS 320 bleu led blinking  (Read 896 times)

yveson33

  • Level 1 Member
  • *
  • Posts: 1
DNS 320 bleu led blinking
« on: September 24, 2013, 02:13:52 PM »

Hi,

i recently buyed d-link dns-320, after installed one drive, and    
turn on, the bleu led still blinking and fan doesn't run.  can you tell me what can i do to used my dns-320.

thx.

Sorry for my english.
Logged

ivan

  • Level 5 Member
  • *****
  • Posts: 738
Re: DNS 320 bleu led blinking
« Reply #1 on: September 25, 2013, 02:32:35 PM »

First thing check that the drive is correctly seated in the unit.

Next, check that the network cable is connected and, when power is switched on the LED indicators on the lan port are lit.

Make sure the DNS-320 is connected to your network then use the Easy Search Utility and see if you can find it on the network.

If you can find it on your network follow the setup procedure and see if you can format the disk.

If one or more of the above fail you may have a defective unit which should be returned to your supplier for replacement.
Logged