• May 20, 2018, 08:53:47 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Program to check hdd for errors on DNS-320  (Read 1319 times)


  • Level 1 Member
  • *
  • Posts: 1
Program to check hdd for errors on DNS-320
« on: July 29, 2013, 01:03:06 PM »

Hi to All,

I did a HDD Check on my DNS-320 using Management -> Scan Disk via WEB application.
I got Failure at the end and information that I have to check my HDD with other application.

Can you suggest to me how can I do this ?

I have installed ffp ( ver 1.3 ) on my DNS-320.

Any information will be helpfully.



  • Level 8 Member
  • ***
  • Posts: 1366
Re: Program to check hdd for errors on DNS-320
« Reply #1 on: July 30, 2013, 03:03:20 AM »

1) Backup the data on the problem drive.

2) Download the disk test tools from the disk manufactures site.

3) Remove the drive from the DNS-320 and put it in a USB/SATA caddy or adapter.

4) Plug USB mounted drive into computer.

5) Run the disk test tools against the drive in question.

6) If the drive shows up as defective replace it and restore your backed up data..