This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.
Hi Joe Public and thanks for this useful link!
Did a small test.Rolleback to 1.03... tried to format in RAID1.It worked...But only detected 1TB total drive instead of 4TB.But was able to set the remaining space to JBOD.Then updated to 1.04b05... RAID volume was no longer working.Only JBOD volume...Reformated trying RAID1... No success... still set as STANDARD so I get Volume_1 & Volume_2
If there's no data stored on the DNS-325, you may want to try mounting the HDDs in a Windows PC to remove all the partitions and try again.
I have exactly the same problem for my 3tb WD red harddrive. Finally I figure it out what is my problem. Google Chrome! Dns-325 interface does not full support chrome. I tried use IE 11 and everything is working normally. Good luck!
Have been 6 months since D-Link Taiwan firmware beta release and not word from D-link USA.There is any date for the official release firmware update for the USA?
I am just curious if this firmware is ok to use on my DNS 325, I check the D link site and they only show 1.03.I have 3 tb red drives
If somebody is interrested, you may try new 1.05b01 firmware at your own risk. I don't know the changes. I can only say that if works form my NAS DNS 325 rev. A1. But there is still the same bug with the fan spin up :-(Here is the link:*******************************************LINK REMOVED BY FORUM MODERATOR
JavaLawyer: You have bad work man ...