• July 07, 2020, 06:31:56 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Updating firmware...  (Read 5025 times)

j-marcelo

  • Level 1 Member
  • *
  • Posts: 19
Updating firmware...
« on: June 14, 2012, 09:28:09 PM »

Hello friends.

I bought a DNS 320 today here in Brazil.
Current NAS Firmware Version:1:00
Firmware Date:09/07/2010
In the box diz Importado por D-LINK BRASIL LTDA

Which version should I upgrade (200,202,203-beta) ?
http://tsd.dlink.com.tw/downloads2008detail.asp
for WW version ?
My DNS 320 is A1 or A2 ?
Is compactible ?
Which version corrupts data ?


I will use 2 HDDs 2 Tb.

thank you
Excuse my poor English.
Marcelo
« Last Edit: June 14, 2012, 09:32:35 PM by j-marcelo »
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Updating firmware...
« Reply #1 on: June 14, 2012, 11:14:08 PM »

Upgrading firmware doesn't effect (corrupt) your data.

As for which version to upgrade to, I suggest going for v2.00 which is the stable release. Do take note that any version above 2.01 onward doesn't allow downgrading.
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Updating firmware...
« Reply #2 on: June 15, 2012, 05:14:34 AM »

My DNS 320 is A1 or A2 ?
...
I will use 2 HDDs 2 Tb.

The serial number sticker on your DNS-320 will indicate whether the device is hardware version "A1" or "A2".  The more recent firmware versions support HDDs larger than 2TB. Since you are have no immediate need for larger (>2TB) HDD capacity, you should be okay with firmware version 2.00 as the last poster indicated.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

j-marcelo

  • Level 1 Member
  • *
  • Posts: 19
Re: Updating firmware...
« Reply #3 on: June 15, 2012, 10:48:10 AM »

The serial number sticker on your DNS-320 will indicate whether the device is hardware version "A1" or "A2".  The more recent firmware versions support HDDs larger than 2TB. Since you are have no immediate need for larger (>2TB) HDD capacity, you should be okay with firmware version 2.00 as the last poster indicated.

Again my thanks JavaLawyer

Att.
j-marcelo
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Updating firmware...
« Reply #4 on: June 15, 2012, 10:58:41 AM »

Glad I could help. Good luck.  ;)
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

j-marcelo

  • Level 1 Member
  • *
  • Posts: 19
Re: Updating firmware...
« Reply #5 on: June 21, 2012, 11:06:56 AM »

Glad I could help. Good luck.  ;)

Hello,

http://forums.dlink.com/index.php?topic=47346.msg179115#msg179115

http://forums.dlink.com/index.php?topic=46679.msg170695#msg170695

The two problems above occur with versions 2.2 and 2.03 ?

My NAS is with version 1.00.
I am in doubt whether to upgrade to a 2.00 or higher (2.02,2.03).

I will use two 2TB disks.
The 2.00 version works stable with 2TB HDD ?


Very thanks again for help.
sorry my bad inglish

j-marcelo
Logged

petohl

  • Level 1 Member
  • *
  • Posts: 13
Re: Updating firmware...
« Reply #6 on: June 22, 2012, 03:33:15 AM »


The 2.00 version works stable with 2TB HDD ?


Yes, use this version. Here is no 0kb issue.
Logged