Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mrsr71]

I know this has been covered before but, I couldn't find the topic in a search 
In the motion detection grid, do the cross-hatched areas represent the areas "COVERED" in motion detection, or "NOT COVERED" 

Thanks...

(4 DCS-932L's & one DCS-930 with firmware all up-to-date  )

[JavaLawyer]

I forget myself sometimes, the manual is quite ambiguous. 

If you are having motion detection sensitivity issues, start with a very low detection sensitivity (e.g. 5%) and work you way up to a higher number.

[mrsr71]

I forget myself sometimes, the manual is quite ambiguous. 

If you are having motion detection sensitivity issues, start with a very low detection sensitivity (e.g. 5%) and work you way up to a higher number.

Thanks but, In the motion detection grid, do the cross-hatched areas represent the areas "COVERED" in motion detection, or "NOT COVERED"   

[peterd]

They represent the areas "COVERED" in motion detection.

[acellier]

They represent the areas "COVERED" in motion detection.

The word "COVERED" may be interpreted by some as "OBSCURED", especially to non-English speakeers - how about we say the cross-hatches are the areas where motion is SENSED ? Thus, no cross-hatch means no sensing.
I *think* that's what we mean ...