• July 19, 2019, 08:10:21 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DI-804HV - VPN configuration for windows 7 client  (Read 9035 times)

freemind

  • Level 1 Member
  • *
  • Posts: 2
DI-804HV - VPN configuration for windows 7 client
« on: March 28, 2011, 07:48:48 AM »

Hello,

I'm sorry, but I do not found my product into the list, so I add a post here!!  :-\

I have a DI-804HV firewall-router. I want to connect my network using VPN ipsec protocol.
On router side I follow the default procedure (wizard that create a dynamic VPN setting) and add an user. I let the IKE and ipsec proposal as default.
On the other side, I have a Window 7 pro 64bits. I have configured the VPN to connect the router. The configuration is very simple!!

As a result, windows cannot establish a VPN tunnel with the router. Inside the log of router, i have the following lines:

Monday March 28, 2011 15:20:37 Receive IKE M1(INIT) : 192.168.1.42 --> 192.168.1.120
Monday March 28, 2011 15:20:37 Try to match with ENC:None AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:None AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:None AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:3DES AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:3DES AUTH:PSK HASH:SHA1 Group:Group2
Monday March 28, 2011 15:20:38 Send IKE (INFO) : delete 192.168.1.120 -> 192.168.1.42 phase 1

May be some one knows wich IKE and ipsec parameter must be used for windows 7 ipsec connection


Thank you and best regards.

Logged

freemind

  • Level 1 Member
  • *
  • Posts: 2
Re: DI-804HV - VPN configuration for windows 7 client
« Reply #1 on: March 29, 2011, 05:41:07 AM »

Hello,

After new search, I do not found the correct configuration to establish a VPN (IPSEC or L2TP) connection  from a windows 7 64byte to the DI-804HV.
But I found a way to establish a connection using the shrew VPN client.

The issue is not solved, but I found an acceptable solution waiting for the final one!!!

Best Regards.
Logged

shalodge

  • Level 1 Member
  • *
  • Posts: 6
Re: DI-804HV - VPN configuration for windows 7 client
« Reply #2 on: May 08, 2011, 04:29:08 AM »

Your local and remote subnets are the same!
Logged