• December 12, 2018, 06:31:26 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DES-3326SR How to set up vlans  (Read 8291 times)

zombie8u

  • Level 1 Member
  • *
  • Posts: 1
DES-3326SR How to set up vlans
« on: February 12, 2011, 03:18:59 PM »

This is how I got my vlans to work.  Don't know if all settings are necessary but here they are.
Hope this helps somebody.



Router settings

Linksys BEFVP41 Settings:

LAN IP Address: 192.168.2.254
Subnet Mask: 255.255.255.0

DHCP: Enabled
Starting IP Address: 192.168.2.2

DNS:
#1: 192.168.2.254
#2: 4.2.2.1

Static Routing:
#1
Destination LAN IP: 192.168.3.0
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Hop Count:1
Interface: LAN

#2
Destination LAN IP: 192.168.4.0
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Hop Count:1
Interface: LAN

_____________________________________

Switch Settings

D-link DES-3326SR Settings:

Basic setup

   Basic Switch Setup:

Get IP From: Manual
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.254
VLAN Name: default


VLAN Configurations:

   802.1Q VLANs

VLAN ID: 1
VLAN Name: default
Advertisment: Enabled
Members: 1 untagged

VLAN ID: 2
Advertisment: Enabled
Members: 2-8 untagged

VLAN ID: 3
Advertisment: Enabled
ports: 9-16 untagged

VLAN ID: 4
Advertisment: Enabled
prots: 17-26 untagged


Layer 3 IP Networking:

   Setup IP Interfaces:

Interface Name: System
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
VLAN Name: default
Active: Yes

Interface Name: 192.168.2.1
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
VLAN Name: vlan2
Active: Yes

Interface Name: 192.168.3.1
IP Address: 192.168.3.1
Subnet Mask: 255.255.255.0
VLAN Name: vlan3
Active: Yes

Interface Name: 192.168.4.1
IP Address: 192.168.4.1
Subnet Mask: 255.255.255.0
VLAN Name: vlan4
Active: Yes


   RIP Settings:

      RIP State:

RIP Status: Enabled

      Setup RIP:

Interface Name: System
IP Address: 192.168.1.1
Tx Mode: Disabled
Rx Mode: Disabled
Auth: Diabled
State: Disabled

Interface Name: 192.168.2.1
IP Address: 192.168.2.1
Tx Mode: V2 Only
Rx Mode: V1 or V2
Auth: Diabled
State: Enabled

Interface Name: 192.168.3.1
IP Address: 192.168.3.1
Tx Mode: V2 Only
Rx Mode: V1 or V2
Auth: Diabled
State: Enabled

Interface Name: 192.168.4.1
IP Address: 192.168.4.1
Tx Mode: V2 Only
Rx Mode: V1 or V2
Auth: Diabled
State: Enabled


Forwarding:

   IP Forwarding:

      Static/Default Routes:

#1
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway IP: 192.168.2.254
Metric: 1

#2
IP Address: 192.168.2.0
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.2.1
Metric: 1

#3
IP Address: 192.168.3.0
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.2.254
Metric: 1

#4
IP Address: 192.168.4.0
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.2.254
Metric: 1


Switch Utilities:

   Others:

      BOOTP/DHCP Relay:

BOOTP/DHCP Relay Status: Enabled
BOOTP/Hops count Limit: 4
BOOTP/DHCP Relay Time Threshold (sec): 0

      BOOTP/DHCP Relay Interface Configurations:

Interface Name: 192.168.3.1
server 1: 192.168.3.1

Interface Name: 192.168.4.1
Server 1: 192.168.4.1

      DNS Relay:

DNS Relay State: Enabled
Name Server [1]: 192.168.2.254
DNS Relay Cache Status: Disabled
DNS Relay Static Table Lookup Status: Enabled

      DNS Relay - Static Table Configurations:

Domain Name: vlan2
IP Address: 192.168.2.1

Domain Name: vlan3
IP Address: 192.168.3.1

Domain Name: vlan4
IP Address: 192.168.4.1


Plug router into vlan2, plug PCs into vlan2, vlan3, or vlan4

Configure static IP settings on each PC hooked to a vlan, e.g., vlan4
IP Address: 192.168.4.105
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.4.1
Logged