• December 02, 2020, 04:48:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Port forwarding doesn't work  (Read 8200 times)

RDN

  • Level 1 Member
  • *
  • Posts: 3
Port forwarding doesn't work
« on: July 05, 2010, 10:05:07 AM »

 I recently bought a DIR-655.  Everything seems to work fine except port forwarding.  I tried upgrading to 1.34NA firmware but that didn't help.  Any ideas?
Logged

EddieZ

  • Level 10 Member
  • *****
  • Posts: 2494
Re: Port forwarding doesn't work
« Reply #1 on: July 24, 2010, 01:14:46 PM »

Be more specific: what did you try to forward and how/what did you enter in the setup.
Logged
DIR-655 H/W: A2 FW: 1.33

Cobra

  • Level 4 Member
  • ****
  • Posts: 477
Re: Port forwarding doesn't work
« Reply #2 on: July 25, 2010, 09:09:45 AM »

Scroll down on this page and you may find the program/application you want to forward as well as how to do it sucessfully.

http://portforward.com/english/routers/port_forwarding/Dlink/DIR-655/DIR-655index.htm
Logged

SSVegeta

  • Level 1 Member
  • *
  • Posts: 6
Re: Port forwarding doesn't work
« Reply #3 on: August 25, 2010, 03:17:38 PM »

Same problem here, Just one day to another the router stop forwarding the ports of Enable Remote Management no mater what port I put it's doesn't work.
I have two routers in my network and the problem that I found:
1. Lan to External IP with the port: doesn't work
2. Lan to External IP second router port: doesn't work
3. From another Network to External IP with the port: Work.
4. From another Network to External IP second router to the port: Doesn't work.

If I put the same port to another computer works ok.
If I put the IP of the second router in the DMZ is work ok also.

If I ping to any unused IP for example 192.168.1.200 the ping respond.
Reply from 192.168.1.4: Destination host unreachable.
When the IP 192.168.1.4 is in use.

Why the address change?

All the other port is working fine.

Already reprogram the Firmware without success.

Hope some one can help my.

BR


Logged

dj1990

  • Level 1 Member
  • *
  • Posts: 6
Re: Port forwarding doesn't work
« Reply #4 on: September 06, 2010, 11:14:58 AM »

I just posted today with a problem that might be the same: http://forums.dlink.com/index.php?topic=14881.0

Hopefully someone can help solve both our problems ... please let me know if you find a solution.

dj
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2205
Re: Port forwarding doesn't work
« Reply #5 on: May 29, 2017, 09:48:08 PM »

Same problem here, Just one day to another the router stop forwarding the ports of Enable Remote Management no mater what port I put it's doesn't work.
I have two routers in my network and the problem that I found:
1. Lan to External IP with the port: doesn't work
2. Lan to External IP second router port: doesn't work
3. From another Network to External IP with the port: Work.
4. From another Network to External IP second router to the port: Doesn't work.

If I put the same port to another computer works ok.
If I put the IP of the second router in the DMZ is work ok also.

If I ping to any unused IP for example 192.168.1.200 the ping respond.
Reply from 192.168.1.4: Destination host unreachable.
When the IP 192.168.1.4 is in use.

Why the address change?

All the other port is working fine.

Already reprogram the Firmware without success.

Hope some one can help my.

BR

I can't get this to work either.  My setup sounds almost like yours with 2 routers, but router2 is behind the dlink dir-655.  hw rev B1, 2.11NA F/W.  Router2 is to only extend or whatever main router.  Mydlink.com is working just fine.

In fact, I can see in the "INTERNET SESSIONS" all my dlink cams phoning home to california, 52.8.x.x:443 and 54.193.x.x:443. BaMoh would be interested in that.


I do see this obscure entry in the log: notice May 29 23:35:11  client6_init: skip opening control port 

I'm not sure if that is related to my issues.




Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2205
Re: Port forwarding doesn't work
« Reply #6 on: May 29, 2017, 10:11:49 PM »

I dumped it in the DMZ as you suggested. I was able to access the DNR202L on the external IP :80

This is ridiculous. I unchecked the DMZ and rebooted the router, and I can still access the DNR202L on external port 80.
Another reboot appears to have blocked it from being the in DMZ.

Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort.


I give up. 3 hours wasted. This shouldn't be this difficult.

« Last Edit: May 29, 2017, 10:13:45 PM by RYAT3 »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49375
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Port forwarding doesn't work
« Reply #7 on: May 30, 2017, 08:14:09 AM »

Lets make a new post since this is over 7 years ago.  ::)
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.