+  D-Link Forums
|-+  D-Link GamerLounge» DGL-4500» Advanced Wireless Settings??
Username:
Password:
Pages: [1]
  Print  
Author Topic: Advanced Wireless Settings??  (Read 11225 times)
philwoz98
Level 2 Member
**
Posts: 62


« on: February 18, 2010, 09:23:05 PM »

Hi, when I log into my router and go into Advance/ Advance Wireless what are the ideal settings  that work well? Thanks and any thoughts or recommendations are appreciated.

Transmit Power :

Beacon Period : (20..1000)

RTS Threshold : (0..2347)

Fragmentation Threshold : (256..2346)

DTIM Interval : (1..255)

802.11d Enable :

WLAN Partition :

Multicast To Unicast :

WMM Enable :

Aggregation Limit :

TPC Max Gain : (0..50)

Aggregation Max Size : (2000..65535)

Aggregation Num Packets : (1..64)

Force Short Slot for 11N Clients :

A-MPDU Aggregation :

Short GI :
Logged
FurryNutz
Poweruser
  ▲
▲ ▲
*****
Posts: 27137


D-Link Global Forum Moderator


WWW
« Reply #1 on: February 19, 2010, 07:17:33 AM »

These settings seem to be set up pretty well. The only thing that some people have mentioned on here is to disable Short GI and that's about it. I'm currently using N mode only on 2.4Ghz on my A1 HW using 1.22NA. 5Ghz works ok but has a bit more errors. And the fact that there's only one device in the house and can do 5Ghz it's not a major issue. There hasn't been any disconnects. I've been able to transfer large files from my server via WiFi perfectly.
Logged

Cable:50mb/3Mb>Motorola SB6180>DGL-5500>HP 24pt Gb Switch. 3x4500s,DGL-5500,DIR-857,835,827,880L,868L,865L,826L,810L,685,657,3x655,645,601,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting
philwoz98
Level 2 Member
**
Posts: 62


« Reply #2 on: February 19, 2010, 10:23:15 AM »

Those where the ranges, I did not give any of my settings...... I am looking for those settings.
Logged
FurryNutz
Poweruser
  ▲
▲ ▲
*****
Posts: 27137


D-Link Global Forum Moderator


WWW
« Reply #3 on: February 19, 2010, 11:07:26 AM »

Default settings that are already set up in the 4500 is what I was referring too. They seem to work well.
Logged

Cable:50mb/3Mb>Motorola SB6180>DGL-5500>HP 24pt Gb Switch. 3x4500s,DGL-5500,DIR-857,835,827,880L,868L,865L,826L,810L,685,657,3x655,645,601,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting
HankRiker
Level 2 Member
**
Posts: 83



« Reply #4 on: February 28, 2010, 08:04:51 AM »

Those where the ranges, I did not give any of my settings...... I am looking for those settings.

DGL-4500 Defaults (As of FW 1.21NA)

Transmit Power : High
Beacon Period : 100
RTS Threshold : 100
Fragmentation Threshold : 2346
DTIM Interval : 1
WLAN Partition : Off
WMM Enable : On
Short GI : On

Several of the others are "hidden" by the router, and are not easily changed, nor do I think they need to be changed.
Logged

My D-Link Hardware:
DIR-825 HW:B1 FW:2.02NA || DIR-825 HW:A1 FW:1.01 || DGS-1016D HW:C1 || DGL-4500 HW:A1 FW:1.02
DGL-4300 HW:A4 FW:1.9 || DGS-2205 || DGL-4300 HW:A2 FW:1.9 || DGL-4300 HW:A1 FW:1.9
Pages: [1]
  Print  
 
Jump to:  

Theme by webtechnica.com.