I have a DFL-210 firmware 2.26.00
First the router is working fine, I set up a VPN, and it works I can access my cameras through the VPN, still have trouble accessing some of the lan clients...but thats another issue (I think?),the issue I am having is I have 10 dlink cameras on the LAN that I need to forward the ports and setup the virtual ips...
I have followed a guide I found...yet cannot get it to work...and im sure unsure why its not working.....
IP-CAM_1 192.168.0.104:79(control panel), PORTS TO FOWARD FOR THE CAM 4001-4003(A/V stream)
IP-CAM_1 192.168.0.105:80(control panel), PORTS TO FOWARD FOR THE CAM 5001-5003
IP-CAM_1 192.168.0.106:81(control panel), PORTS TO FOWARD FOR THE CAM 6001-6003
IP-CAM_1 192.168.0.107:82(control panel), PORTS TO FOWARD FOR THE CAM 7001-7003
I wont list the rest for obvious reasons....just an example of what I have..
The current setting under IP Rule is:(in main rule folder)
1. Cam1 Action/SAT----SrcIf/any----SrcNet/all-nets-----DestIf/Core----DestNet/WanIP---SAT-Tab- Destination IP "checked" to 192.168.0.104
2. Cam1 Action/NAT----SrcIf/any----SrcNet/all-nets-----DestIf/Core----DestNet/WanIP
3. Cam1 Action/ALLOW----SrcIf/any----SrcNet/all-nets-----DestIf/Core----DestNet/WanIP---
Service for allRules is: all_tcpudp
I also tried another guide where I ARPed 10 wan addresses, they are still ARPed right now, but I am not using them.
The goal I am trying to obtain is to be able to use my wanIP with according port number to get access to my cameras.
I do not want to use a VPN of any sort to get access to my cameras.
(wan_IP)
xx,xx,xx,xx:79
xx,xx,xx,xx:80
xx,xx,xx,xx:81
xx,xx,xx,xx:82
xx,xx,xx,xx:83
etc...
Please any help would be appreciated...if you need me to I can send you my config file, or a lot of screen shots!!
Thank you for your time.
Justin R.