D-Link IP Cameras for Home > DCS series Network Cameras

problem with DCS-920 and dyndns

<< < (2/2)

fordem:
That is actually your problem - you need to have at least a basic understanding or get some one who does to assist you.

You can use a static address in a network with a DHCP server, however you need to configure the DHCP server not to issue the address that you are using for static (this is known as an exclusion range) - some (but not all) routers issue addresses from x.y.z.101 leaving you with everything from x.y.z.2~x.y.z.100 to be used as static addresses.

Yes - you would use the WAP IP + port to access the camera remotely - but - you have to tell the router (port forwarding) where - which internal ip address - to forward the connection to, so if the internal address keeps changing, port forwarding won't work.

Navigation

[0] Message Index

[*] Previous page