Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Get it here:
http://forums.dlink.com/index.php?topic=62277.0

Let us know how it works for you...

[ektorbarajas]

Hi Furrynutz. This firmware screwed my DAP-1360 

I'm having a lot of issues and the previous firmware that my device had is no longer present to re-download again at D-link ftp servers 

I tried to apply 3.03 Downloaded from d-link website and my device won't accept it. It says it's not a valid fw. I've Downloaded it twice !!

Is there a way to get the fw 3.04???

[ektorbarajas]

Hi Furrynutz. This firmware screwed my DAP-1360 

I'm having a lot of issues and the previous firmware that my device had is no longer present to re-download again at D-link ftp servers 

I tried to apply 3.03 Downloaded from d-link website and my device won't accept it. It says it's not a valid fw. I've Downloaded it twice !!

Is there a way to get the fw 3.04???

[FurryNutz]

What kind of problems are you seeing?

Did you factory reset the DAP, load the FW file, then factory reset the DAP once more and set up from scratch?

[ektorbarajas]

Hi. Several problems!:
- as repeater mode, not detecting any WiFi
- not able to access it from any web browser
- when I manage to finally setup, no wifi signal is emmited or repeated from there

I've tried to factory reset it and set it up from scratch, with no result.

[FurryNutz]

Wow, ok, I'll forward this to D-Link for review.

You can get v3.04 from tsd.dlink.com.tw

Let us know the results of putting this FW back on...

[ektorbarajas]

Hi FurryNutz, reverted it back to 3.04 and it's working fine.

I finally modded the DIR-827 and applied 3 heat sinks, DIR-827 and DAP-1360 are working fine, so far it has been 4 days, hope that now my WiFi works as expected.

Regards

[FurryNutz]

Awesome. I'll forward this to D-Link for review.

Hope it works better for you. 

[Axel49]

Do we have some more updates to this thread?

I have three DAP-1360 Rev C1 FW v 3.04 who ran into trouble some weeks ago. What happened is that the internal system clock doesn't synchronise properly anymore with the NTP server on net. I may assume that the internal system clock time range has been exceeded and therefore new settings via NTP do not work well. 
I can see this on the internal system log - the timestamps in the log do not show the proper time. The cumbersome effect is that some mobile phones (Android SmartPhone) do not accept WiFi connection due to system clock mismatch.
This problem has been referenced for older GPS devices who do not connect and synchronise properly anymore with GPS satellite. The cause is said to be that they are unable to continue to work because the current time range is beyond their time range limit,

I don't think that a new FW version is sufficient to handle this, a new H/W revision is required with  a new system clock chip supporting the actual time interval.

Can someone help me on this point?

I also had problems with the internal system log - I had to restart the DAP-1360 regularly to clear the internal system log automatically because it stopped working due to internal system log overflow! But actually, I can automatically manage this via an automated reset (power off/on). Worser is that Android SmatPhone refuses ho connect via WiFi due to clock mismatch!

Grateful for tips! Most probably, I will buy upgraded DAP-1360 devices - I am very satisfied with it for a long time!

Kind regards,
Axel

[FurryNutz]

Link>Welcome!

• What region are you located?

What Mfr and model is the main host router?
Has a factory reset and setup from scratch been performed on the DAP?

Do we have some more updates to this thread?

I have three DAP-1360 Rev C1 FW v 3.04 who ran into trouble some weeks ago. What happened is that the internal system clock doesn't synchronise properly anymore with the NTP server on net. I may assume that the internal system clock time range has been exceeded and therefore new settings via NTP do not work well. 
I can see this on the internal system log - the timestamps in the log do not show the proper time. The cumbersome effect is that some mobile phones (Android SmartPhone) do not accept WiFi connection due to system clock mismatch.
This problem has been referenced for older GPS devices who do not connect and synchronise properly anymore with GPS satellite. The cause is said to be that they are unable to continue to work because the current time range is beyond their time range limit,

I don't think that a new FW version is sufficient to handle this, a new H/W revision is required with  a new system clock chip supporting the actual time interval.

Can someone help me on this point?

I also had problems with the internal system log - I had to restart the DAP-1360 regularly to clear the internal system log automatically because it stopped working due to internal system log overflow! But actually, I can automatically manage this via an automated reset (power off/on). Worser is that Android SmatPhone refuses ho connect via WiFi due to clock mismatch!

Grateful for tips! Most probably, I will buy upgraded DAP-1360 devices - I am very satisfied with it for a long time!

Kind regards,
Axel

[DennisOlof1]

Long time ago I was active on this forum. Anyway my old DAP-1360 Rev. B are still running fine as basic AP in a small network. Still going strong after 10 years, I only had to get new AC adapters because the old ones failed.

I recently bought two second hand DAP-1360 units that are Rev C1 and Rev C2 and they both had old firmware. After some research, checking this forum and bouncing around the web I found the information I was looking for. These units are intended as backup if the others fail.

dap-1360_fw_revc_3-08_eu_multi_20170320.zip is the latest firmware and has the DAP-1360C2_FW308b11.bin file in it. I can confirm that this firmware works on both the C1 unit and C2 unit. They only changed the H/W name with the v3.0.7.b04 firmware update. The web interface do show the C2 H/W on the C1 H/W unit on the web page but it seems to work fine. This could be confusing for some people.

If you have these older DAP-1360 H/W C, C1 or C2 units you should be able to update the firmware to v3.0.8.b11 and when update is complete and the unit up and running, do not forget to use the "reset" button and reset the unit. This only needs to be done once and you should have no problems after that.

This product is EOL for some time now but I am posting this information here anyway