• October 28, 2020, 08:30:27 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Vlans  (Read 21528 times)

00kennedyp

  • Guest
Vlans
« on: September 20, 2009, 06:18:45 AM »

i have research this problem for weeks

I NEED to have 2 vlans on the one switch use one port to uplink to a layer 3 DGS-3324


I have a fibre uplink to each Des-1252 i need to setup vlans for each room in are building as the room span multiple switches i know i need tagged ports

EG

Switch 1 Vlan A (1-16)  Vlan B (17-48)

Switch 2 Vlan A (1-8)   Vlan B (9-48)

both vlans need to use port 51 (the Fibre as an uplink)


I have be able to make the Vlans but not link both Vlans with one uplink

Logged

Fatman

  • Poweruser
  • Level 9 Member
  • ****
  • Posts: 1675
Re: Vlans
« Reply #1 on: September 21, 2009, 09:24:38 AM »

Make your "Access" ports untagged on the desired VLAN (and not a member of all others) and make your "Trunk" port Untagged on VID 1 and tagged on every other VLAN.  Match this set up on every switch and you will be rocking and rolling.
Logged
non progredi est regredi

00kennedyp

  • Guest
Re: Vlans
« Reply #2 on: August 17, 2010, 03:29:48 AM »

new problem


we have 3 * DGS-3324SR core switches

The core switches or connected to the Des-1252 to give the 1Gb uplink

We need to make vlan for each room in are building

the issue is due to expansions of the rooms the ports within the room track back to mutiple Des-1252


SO we need to seprate the Uplinks from the Core switches into vlans

and we need vlans that seprate rooms but will have to cross mutiple core 2 switches (The Des-1252)

Logged

Fatman

  • Poweruser
  • Level 9 Member
  • ****
  • Posts: 1675
Re: Vlans
« Reply #3 on: August 17, 2010, 08:22:27 AM »

Unless I am missing something, I don't see any problems there, all your switches are 802.1q, so just be mindful of which ports to between switches and make them tagged for all VLANs that need to pass over that link.
Logged
non progredi est regredi

00kennedyp

  • Guest
Re: Vlans
« Reply #4 on: August 18, 2010, 01:53:57 AM »

i know there shouldnt be a problem

I need some help basically we have not got the vlans working on the layer 3 and layer 2 together


I dont understand the settings on the layer 3

Egress, none and forbiden and Gvrp settings

Is there a chance getting sumeone in to help us from dlink


Will try to take some pictures and maybe you can show me what i need to do
sorry uploaded the wrong ones

http://img833.imageshack.us/img833/7649/sam2964.jpg
« Last Edit: August 18, 2010, 11:49:27 AM by 00kennedyp »
Logged

Fatman

  • Poweruser
  • Level 9 Member
  • ****
  • Posts: 1675
Re: Vlans
« Reply #5 on: August 18, 2010, 08:28:24 AM »

That is not the ugliest rack I have ever seen, but I am at a slight loss as to how those pics are supposed to help me.

Egress means that port is a member, if the tag box is checked that is a tagged port, is the tag box is not checked it is an untagged port.

And as far as getting help from D-Link, the right way of doing that is to call the TS line based on product and region.  Log into support.dlink.com and we can get you headed to the right number.
Logged
non progredi est regredi

00kennedyp

  • Guest
Re: Vlans
« Reply #6 on: August 18, 2010, 03:30:46 PM »

Hi fatman cheers for all the help

I think i have worked out how to do the VLans


If a have the servers, printer and computers for each room in a single VID and tag the uplink of the Des-1252

and overlap the VID on the server for each VID. the vlans should work????
Logged